help with tire fitment please (no stretch)

[Danny915]

I run 16x7.5 et20 and run 225 all around, got the fenders rolled and had no issue of rubbing or anything

Sent from my SGH-M919 using Tapatalk

[MR 325]

It would help but not sure if it'll work still without some pulling.

[Wasefi]

With that width and offset a 225/45 is going to be the most you can fit with rolled fenders.

What about if I change my offset? Because the wheels are also available in et25.

[MR 325]

With that width and offset a 225/45 is going to be the most you can fit with rolled fenders.

[Wasefi]

I plan on getting a set of 16x8 et15 all the way around, also will roll fenders but no pull. I want to run a wide tire and keep it squared throughout all four wheels. The tire size that I am leaning towards is 225/45r16 but I really wanted to know if I could possibly fit a 245/45r16 and not have to worry about fitment issues.

Just in case your wondering which wheels they are, varrstoen v3

So to recap essentially I want squared setup, wide tires but not too tall. And fender rolling only no pull

Thanks in advance.