ESM 002r common tires?

[Zreberlcoe]

I've bought some ESM's and I know 215's will fit with no spacers or rolling so I'm looking at who has what tires on their 16x8's? Et20!

[ak-]

Alright, what "look" are you going for?
Do you plan to add spacers?

Nowadays, we must know this before properly answering questions like this.

[Zreberlcoe]

Good idea. I don't plan to add spacers and just running these wheels for a daily good looking summer wheels!

[ak-]

205/45 (only if you're very very low.)
205/50
215/45
225/40
225/45

Rear might need a roll with the bigger tires.
Front might need a small spacers if you're on coilovers and not stock housings (collar might hit tire).

[Zreberlcoe]

Sweet! Good to know what'll fit on the E30. Plus I'm not very low, just on IE3's.

[HarryPotter]

I am running 195/45/16's on my style 5's. They are 16x8. They are stretched a tad.

[lambo]

205/50 is what I would do at your height

[MR 325]

205/50 is what I would do at your height

x2

[ProjectCab]

FYI these will need a spacer to clear the front caliper. A 5mm will do. Some have grinded down their calipers as well.

[jb02]

ESM-002R for E30 Baur (stock)

Am interested in running ESM-002R's 16x8 ET20 with 205-50's....my e30 is stock ride height and suspension. Is this a straight bolt on package without spacers or fender rolling? I have seen conflicting information in previous posts and other threads specific to ESM wheels.

If anybody is willing to photo shop ESM-002R's onto the attached E30 Baur with the following variations wheel lip/center I would be extremely greatful:

silver/silver
silver/gold
bronze/black

Thanks!

[Mwishlist]

I'm running the same wheel and tire combination. It was bolt on for my car and I am running a little lowered with a ground control coilover set up. My rears may have been rolled a bit before but I am not sure. At stock ride height, I can't imagine you would have any issues.