I've been on the hunt for reasonably priced BBS wheels for a while now.
I just picked up a set in need of refurbishment on craigslist. These are the Volkswagen BBS RM012s. I've ordered new hardware and 2 inch lips which brings these wheels to 15x8 all the way around.
In researching the sticky I found out that the wheels will be the following spec once I've installed the new lips.
15x8 et14.95 -- Now I need to figure out which spacers to use and what size tires to go with. I'd like to drop the car 2 inches max. Eventually.
Any suggestions on tire size? Would a 10mm spacer be the best way to go? Would I need longer studs?
Thanks in advance!
I just picked up a set in need of refurbishment on craigslist. These are the Volkswagen BBS RM012s. I've ordered new hardware and 2 inch lips which brings these wheels to 15x8 all the way around.
In researching the sticky I found out that the wheels will be the following spec once I've installed the new lips.
15x8 et14.95 -- Now I need to figure out which spacers to use and what size tires to go with. I'd like to drop the car 2 inches max. Eventually.
Any suggestions on tire size? Would a 10mm spacer be the best way to go? Would I need longer studs?
Thanks in advance!
Comment