ASK ALL WHEEL/TIRE FITMENT QUESTIONS HERE - The Official Wheel/Tire Fitment Thread

[Mystikal]

Wheel specs: 17X8 ET 22

Compomotive TH

Would I be able to fit these on a car with H&R race and billy sports without rolling fenders?

Yup, with 215/40/17 tires. It'll be very close.

[Mystikal]

could you make a -10 off set work in the rear and what tire? Yes I have a fender roller.

With a 6" wide rim, sure. Otherwise, not really.

[Mystikal]

yoooo jay.
just wanted to thank you for your help.
The fronts (235/40/17) made it so i had to raise the front of the car up alot, probably an inch and a half. But i dont care about being low. I think it looks great!
I told you i would show some pics when it was done!
so heres the link tothe showroom thread
http://r3vlimited.com/board/showthre...56#post1672656

Sweet. What spacers if any did you end up using?

[ejnight]

89 325is HR race-billys sports 16 7's +22 for the front 16 8's +10 for the rears what size tires? any rubbing or spacers needed. I want an aggressive look.
Thanks for your time.

[Mystikal]

89 325is HR race-billys sports 16 7's +22 for the front 16 8's +10 for the rears what size tires? any rubbing or spacers needed. I want an aggressive look.
Thanks for your time.

Getting the sidewall heights to match will be tough. I'd honestly go with 205/45/16 all around.

[ejnight]

Getting the sidewall heights to match will be tough. I'd honestly go with 205/45/16 all around.

I was hoping for a little more in the rear. what can I do?

[Mystikal]

I was hoping for a little more in the rear. what can I do?

Roll the fenders FLAT for a 215/45/16.

[ejnight]

Roll the fenders FLAT for a 215/45/16.

will do.

[TARGET]

Hey guys, i'm looking at a set of 16x9.5" vette wheels, i can't find info on them other than:

16"x9.5" 38mm (6.7" backspacing)

I know the bolt pattern is wrong but I'm planning on running adapters, would these fit in the fronts or am i going to poke like it's prom night and I've been eating viagra like pez?

[Hammered]

im not 100% but et is 49.5

[TARGET]

does that mean they will fit?

[onaquest]

That's a very aggressive offset. 205/45/16 all around would be my bet.

i went with 205/45. Great fitment thanks to evo3 and mystikal for their advice

[erik325i]

Quick question:
Which wheel will stick out farther, a 17x10 with et20 or a 16x8 et11? How much farther will it stick out?
Thanks
Erik

[Kilawin]

Quick question:
Which wheel will stick out farther, a 17x10 with et20 or a 16x8 et11? How much farther will it stick out?
Thanks
Erik

The 17x10. About 5/8" more.

[Mystikal]

Hey guys, i'm looking at a set of 16x9.5" vette wheels, i can't find info on them other than:

16"x9.5" 38mm (6.7" backspacing)

I know the bolt pattern is wrong but I'm planning on running adapters, would these fit in the fronts or am i going to poke like it's prom night and I've been eating viagra like pez?

You'd have to run at least 33mm of spacing just to clear the front struts. And yes, they'll be poking out A LOT without like 4 degrees of negative camber.