ASK ALL WHEEL/TIRE FITMENT QUESTIONS HERE - The Official Wheel/Tire Fitment Thread

[Nick_e30]

89 vert on eibach springs and bilsteins looking to buy wheels that are 15x8 et 17 on 205 50 15 tires will I have any clearance issues ?

Sent from my SM-G950U using Tapatalk

[Mushi]

Does anyone know if BMW Style 15 (16x7.5 et20) will clear e36 m3 brakes?
I know e38 style 5s can but can't find information on style 15s clearing (w/ or without spacers)

thanks

Style 5s are 16x8 et23. if style 15 won't clear then you need 3mm spacer.

[d_elson0]

Does anyone know if BMW Style 15 (16x7.5 et20) will clear e36 m3 brakes?
I know e38 style 5s can but can't find information on style 15s clearing (w/ or without spacers)

thanks

[Mushi]

245/45/16 it is possible on the rear 16x9 et20 with z4 hubs.

[flamesone]

Car: 1988 325i convertible
Suspension: KW V3 coilovers
Wheel: BBS RS Reps 17x8.5 et15 all corners
Tire: 215/40/17 or possibly 225/40/17

Can someone confirm this will work without any rubbing? Do I need spacers??

[skrrtythiirty]

Car: 86' 325i
Suspension: Bilstein sports and H&R super sport springs

Hi, I'm looking to get a new set of wheels for my e30, my question is if 16x8J wheels w/ an ET around 20ish will fit without rubbing(Fenders not rolled). Tires wouldn't be anything crazy, open to suggestions here. I like some poke but not to the point where I'll be rubbing. Thanks!

[dzverko]

Looking for some help!

I have a late model e30 on H&R race springs with Bilsteins and I want to buy a set of 17s for it. Here are the specs:

Front: 17x8 et25
Reat 17x9 et20

I know I will most likely need to roll the fenders, which I am fine with (actually I was thinking flares) but I need the biggest possible tires in the back so I can put down the power. I dont want any stretch. I was thinking 235 front and 255 in the back but wanted to know if I will have any issues with strut or shock clearance.

Car is a S52 turbo runing on e85. Havent dynoed yet but I am shooting for 600whp.

Thanks in advance!

Sent from my VS988 using Tapatalk

[EfrenFlores]

Anyone have pics of 235/45 on 16x8?

Curious what it would look like ass far as sidewall goes

[JSV]

Max tyre size

Hello,

Wondering if I still can get some feedback on this great thread.

I have a 320i 1986 2dr, stock fenders, H&R sport springs.
I also have 16 inch 7j Postert rims.

I'm looking for Yokohama AD08R tires. What will be the max width that will fit?

[Swendog]

Hi:

I just bought a set of BBS RX wheels, 4x100, 16x7 ET35 from another forum member. They came with hubcentric rings. When HE purchased them, they also came with 10 mm spacers which he ran in the rear only of his E30. That did not make sense to me. My E30 has H&R Sports, Billy Sports and E90 drop hats. I do not want to roll the fenders. I plan on running 205/50R16 tires. Do I need 15mm spacers on all four corners? That's what I'm thinking to get to ET20. Thanks. Swen.

[itsonlygeorge]

Looking to do a nasieg/elcoy 5 lug BBK kit w/ e46 front hubs and e30 m3 rears. What is the ideal offset? I would really love to run without spacers. Is there a staggered setup that works?

Any chance I can run E38 Style 5's 16x8? I think its a et23 offset.

[santiiiiino]

BBS RS 070 & RS 138 - Center Bore Options & Tires Size Recommendations

newish to the forum. bad at being on here. Thanks for any and all advice.

What size tires do i need for these? i dont even know how to measure for to them..

3 are RS 070, CB 57
1 is RS 138 CB 56.5
CB is .5mm too small. suggestions?

Tire Size? Best options?

[tiagozone]

hi. what to you think aboou work equips 05 in 16by 7.5 et 35 would look on a e30 coupe ? i´m thinking on buying a set and run with spacers in my e30.

[Staszek]

I have a post E30 with H&R Race springs, I want to mount 15x6 et35s, and I want to use 25mm spacers in the rears and 20mm in the front. Will I have issues? I don't want to roll fenders.

Thanks in advance.

Depends on tire size but that should be fine.

[vtechnik]

I have a post E30 with H&R Race springs, I want to mount 15x6 et35s, and I want to use 25mm spacers in the rears and 20mm in the front. Will I have issues? I don't want to roll fenders.

Thanks in advance.