Announcement
Collapse
No announcement yet.
ASK ALL WHEEL/TIRE FITMENT QUESTIONS HERE - The Official Wheel/Tire Fitment Thread
Collapse
This is a sticky topic.
X
X
-
Originally posted by QUKBMER View PostI have a set of wheels that i did the measurement on but can someone do the math please on the off set number.The wheel is a OZ fittipaldi 16x8 5x120 and from the center of the backside of the hub up to the top rim lip is 5 inches. Thanks in advance.As there are no stampings on the wheel for the offset.
Comment
-
Originally posted by Mystikal View PostThen by all means, 17x8.5 +20 235/40 all around.
17x8 ET20. 235/40R17 tyre.
Just a little project im working on
- http://www.lse30.com -
Comment
-
ok so I got the adapter fitment all I need help with now is tire selection. I'll try to be more specific.
The wheels are 8.5 in front and 9.5" rear in width and are 16" wheels.
What section tire can I use without too much stretch or too thick of a wall? I'm having trouble using the size conversion. For example, 195/40/16 on front but what size do I use in the rear since the wheel is an inch wider and I'd like to keep the same sized sidewall?Last edited by Vtec?lol; 02-11-2012, 03:43 PM.
Comment
-
Ok I was referred to you, saying that you were a "god," so here we go. I have KW V1 on my car, bags on the rear. The car is currently on bottlecaps with spacers on the front and they barely clean (cant fit a finger bw the tire and strut). I was told they were 15mm but I could be wrong.
So my question, the car previously had 16x9 et15 wheels on there and they were from (per the po), and I am looking at a 16x8 wheel with a 0 et option and a 20 et option. Knowing that I will HAVE to run a spacer on my car because of the coilover clearance, what kind of et, if any, would I have to look for when buying wheels that would be give me a flush look. The fenders upfront are rolled and the rears are rolled and pulled if that helps. Thanks for any help :)Last edited by utchia; 02-11-2012, 09:12 PM.
Comment
-
2000 M roadster
I picked up a 2000 m roadster and have a set of 19x9 et 25 stock suspension. I was thinking of using spacers in the rear. what tires size could I use? ThanksCustom Made Skid Plates For Sale.
http://www.r3vlimited.com/board/showthread.php?t=111469
http://raceskids.com/
Comment
-
I picked up a 2000 m roadster and have a set of 19x9 et 25 stock suspension. I was thinking of using spacers in the rear. what tires size could I use? ThanksCustom Made Skid Plates For Sale.
http://www.r3vlimited.com/board/showthread.php?t=111469
http://raceskids.com/
Comment
-
Originally posted by Madhatter View PostIm thinking it might not need much work at all now after seeing kalib0y's e30.
17x8 ET20. 235/40R17 tyre.
And I just finished the wheels last night and now it's time to buy some tires, I have a late model mtech II, and E39 style 5, and I really really don't want to roll or pull, please advise the tire size guys.
I searched a lot but almost everyone rolled fenders/quarters and I'm wondering if someone knows the perfect size I need so I don't have to roll
Comment
-
just rolled he said, but nothing special. :) Id say its a must with such a wide tyre under there, might get away with something narrower.Just a little project im working on
- http://www.lse30.com -
Comment
Comment