ASK ALL WHEEL/TIRE FITMENT QUESTIONS HERE - The Official Wheel/Tire Fitment Thread

[moto650]

<raise hand>
Could I get away with 16x8 et20 on my
1988 IX with GC coilovers & camber plates?
I can do some fender rolling but don't want to get crazy.
Thank you,

Yup, stick to 205/45 for tires.

Thank you, just one more :)
16x8 et 10 with 225/50s ?
Same car.w/gc coilovers. not slammed; it is an IX afterall

[Mystikal]

I have a set of wheels that i did the measurement on but can someone do the math please on the off set number.The wheel is a OZ fittipaldi 16x8 5x120 and from the center of the backside of the hub up to the top rim lip is 5 inches. Thanks in advance.As there are no stampings on the wheel for the offset.

That's a +12.

[Mystikal]

16x8
+20
Fenders rolled
Widest tire? Performance minded.

225/45/16

But - there's better street tires available in 205/50 and 215/45.

[Mystikal]

heavy fender work is fine.

Then by all means, 17x8.5 +20 235/40 all around.

[Mystikal]

Thank you, just one more :)
16x8 et 10 with 225/50s ?
Same car.w/gc coilovers. not slammed; it is an IX afterall

I say no to 225/50s. Too tall for front clearance.

[Madhatter]

Then by all means, 17x8.5 +20 235/40 all around.

Im thinking it might not need much work at all now after seeing kalib0y's e30.

17x8 ET20. 235/40R17 tyre.

[QUKBMER]

That's a +12.

Thanks bro.;)

[Vtec?lol]

ok so I got the adapter fitment all I need help with now is tire selection. I'll try to be more specific.

The wheels are 8.5 in front and 9.5" rear in width and are 16" wheels.

What section tire can I use without too much stretch or too thick of a wall? I'm having trouble using the size conversion. For example, 195/40/16 on front but what size do I use in the rear since the wheel is an inch wider and I'd like to keep the same sized sidewall?

[utchia]

Ok I was referred to you, saying that you were a "god," so here we go. I have KW V1 on my car, bags on the rear. The car is currently on bottlecaps with spacers on the front and they barely clean (cant fit a finger bw the tire and strut). I was told they were 15mm but I could be wrong.

So my question, the car previously had 16x9 et15 wheels on there and they were from (per the po), and I am looking at a 16x8 wheel with a 0 et option and a 20 et option. Knowing that I will HAVE to run a spacer on my car because of the coilover clearance, what kind of et, if any, would I have to look for when buying wheels that would be give me a flush look. The fenders upfront are rolled and the rears are rolled and pulled if that helps. Thanks for any help :)

[CW325]

Anyone know the hub bore size on diamond racing wheels? I wanna get hubcentric rings for mine, thanks.

[O HELLA BMW]

what is the hub bore size that fits my 89 bmw 325ix sedan?

im seeing 57.1 , 58.1 , 67.1 , 66.6 , 73.1 ???

thanks

[ejnight]

2000 M roadster

I picked up a 2000 m roadster and have a set of 19x9 et 25 stock suspension. I was thinking of using spacers in the rear. what tires size could I use? Thanks

[ejnight]

I picked up a 2000 m roadster and have a set of 19x9 et 25 stock suspension. I was thinking of using spacers in the rear. what tires size could I use? Thanks

[yanal]

Im thinking it might not need much work at all now after seeing kalib0y's e30.

17x8 ET20. 235/40R17 tyre.

Are fenders and quarters rolled on this car ??

And I just finished the wheels last night and now it's time to buy some tires, I have a late model mtech II, and E39 style 5, and I really really don't want to roll or pull, please advise the tire size guys.

I searched a lot but almost everyone rolled fenders/quarters and I'm wondering if someone knows the perfect size I need so I don't have to roll

[Madhatter]

just rolled he said, but nothing special. :) Id say its a must with such a wide tyre under there, might get away with something narrower.