Hubcentric Ring Problem

[Mystikal]

Ahhh, I see what you mean now. I didn't catch that it was "depth" that was the issue. I'm as lost as you are, unfortunately.

Jay

[StereoInstaller1]

So since mine snapped into the wheel and fit over the hub, I am lost as to how yours should work. My GF's Momo wheels work the same way, but the old set of ASA wheels I had used the cheesy little cone on the hub, which sucked.

[E30_fiend]

Ahhh, I see what you mean now. I didn't catch that it was "depth" that was the issue. I'm as lost as you are, unfortunately.

Jay

Wow that's not good I've stumped the instumpable.

Shit


E30Fiend

[E30_fiend]

So since mine snapped into the wheel and fit over the hub, I am lost as to how yours should work. My GF's Momo wheels work the same way, but the old set of ASA wheels I had used the cheesy little cone on the hub, which sucked.

Well mine can snap onto the wheel or snap over the hub. Either way, they aren't working. Haha


E30Fiend

[Regnar75]

bringing up a very dead thread but did this ever get resolved?

[R3Z3N]

Taylor, I had talked to BBS about hubcentric rings, and apparently there are 2 types of centerbores. I know your not on BBS wheels, but another solution would be to get your wheels sleeved with the correct centerbore.

If it's the depth which is the problem, I think you have a wheel that is not designed to work with hubcentric rings.