BBS Garage: All things BBS

[Eric]

Eric those I believe are BBS RXII


These are BBS RKII






.

oops, your right! I knew RKII's looked different

[Jim Lepage]

Where did you source the parts for that rebuild? Very sweet.

If you're talking to me I took all my parts here:

http://www.custom-tuner.de/

[Eric]

If you're talking to me I took all my parts here:

http://www.custom-tuner.de/

I'm sooo getting a BBS RS lip clock!

[fiftytakedowns]

DOes anyone have any pictures of 16" BBS RK
s with HR sports, and Lowtech 60/50 MM springs, debating between the two.
Thanks

[atomic]

Anyone know where I get a tool to take the bolts out of a set of RKII's at?

Picture for reference




KTHX...

;)

I have a set of RKII's that i'm going to get the lips polished. I was thinking it was just a torx bit, but i didn't look at it too much.

i would try contacting BBS directly.



oh, and taken from bf.c

Mine appear to be a male 12 point torx type tool. A T40 will fit, but is very loose, so I am affraid to try incase it damages the bolts. I have the info saved on the torque settings but can not find anything on what tool is needed or where to get. Guess I will give BBS a call and see what I can come up with through them...

I never contacted BBS directly (didn't have time actually) but took a chance at buying a SK tool 4 piece set of metric 12 point torx sockets on ebay. Turned out thats what was needed, 8mm to be exact, is what was needed out of the set...

http://cgi.ebay.com/ebaymotors/ws/eB...35310&viewitem=

[alexd]

Selling my RC's here.....

http://forums.bimmerforums.com/forum/showthread.php?t=1209691

[iamsam]

What is the hub diameter of the 16x7 BBS RK 4x100 ET35??

in other words, what size hubcentric rings do i need??

[Eric]

I just recieved a set of my dream wheels!

18x8.5 BBS RC et 13 with the deep concave centers!

I'll get pics up later, but they need refinishing, what color should i powdercoat them? I'm thinking white, or a dark grey....

[e30s52]

Eric you should take some pictures of them mounted on your m5.

[Eric]

Eric you should take some pictures of themmounted on your m5.

I sold the M5 a little while ago :(

The rc's are going to the refinishers on Thursday. I think im going to go with a darker grey, will see...

[e30s52]

I sold the M5 a little while ago :(

The rc's are going to the refinishers on Thursday. I think im going to go with a darker grey, will see...

Damn I really wanted to see those wheels on it. :-(

[atomic]

What is the hub diameter of the 16x7 BBS RK 4x100 ET35??

in other words, what size hubcentric rings do i need??

Have no clue but you will need to know the model # of the wheels and maybe contact tirerack (since they sold RK's) or call BBS for that specific information...

There is a chance the hub bore might even be smaller than what you need, so hubcentric rings will do no good.


:!:

[DLag]

hey guys, are OZ MSW lips and BBS RS lips interchangable? I know some works and some don't..

[Morrison]

Does anyone know where to get center cap parts? I'm specifically looking for one of each of the items in the pictures below. The part numbers on them are 09.23.114 and 09.24.029. They are for a 15" ix weave.

[BadCab]

RM's on my obviously unlowered 318ic. 15x6.5 205/50/15 Front, 215/50/15 rear