BBS Garage: All things BBS

**bramon** · 05-05-2010, 12:15 PM

Someone should jump on these, just a quick question, price too high? Or no

http://cgi.ebay.com/ebaymotors/BBS-R...t_12243wt_1026

**Massive Lee** · 05-05-2010, 12:21 PM

The centers have been painted with a rattle can and if you look closely, you'll see the paint job is not great. Therefore, it means the wheels must be taken apart and refinished.

So, yes. priced too high.

Lee

**bramon** · 05-05-2010, 12:26 PM

Originally posted by Massive Lee

The centers have been painted with a rattle can and if you look closely, you'll see the paint job is not great. Therefore, it means the wheels must be taken apart and refinished.

So, yes. priced too high.

Lee

Ah, thanks, sorry I'm looking at it on my phone so I couldn't see too many hi-res shots.

**E30m42cab** · 05-05-2010, 02:35 PM

Originally posted by CleanAzzE30z

Yours dont say "junior line"!! ;)

Honesly, the "Junior Line" pic is brand new to me... I've seen quite a few people asking about these rims on different forums, and all anyone can come up with is "RZ" or "RJ". So, now I at least know what the hell to say when someone asks me what kind of BBS's I have! haha!

**Butler** · 05-16-2010, 10:08 AM

What BBS model are 15" IX weaves? and 14" weaves?

**E30m42cab** · 05-17-2010, 02:13 PM

^^
Pretty sure BBS didn't make the 15" ix weave. At least they're not stamped with BBS on all the 15" ix weaves I have ever seen.

**Butler** · 05-17-2010, 10:38 PM

They say BBS on the back of the caps. I've always been under the impression that they were BBS made.

Can someone else verify what model ix weaves are????

**robrez** · 06-07-2010, 12:14 PM

What is the difference between how basketweave/euroweave centercaps/waffles attach to the wheel versus how BBS RZ and RG centercaps/waffles attach.

I have a set of 15" BBS RGs and a set of 14" basketweave centercaps/waffles. The diameter matches but there is no way to secure the centercaps to the RG wheels.

Here is a pic of the the RGs with on of the basketweave centercap in place. The diameter is right, but the locking mechanism is different, it can't be secured.

So I need to find a way to secure them. Can I keep the waffles and just change the center pieces to RG-specific?

**e30lyf** · 06-13-2010, 08:50 PM

^^^ waffles they might the same. hex nut & the black plastic not the same for RG's.

**rav320uk** · 06-15-2010, 03:23 PM

Here's a few of my collection from across the waters.

BBS RS 003's 8.5j and 9.5j

BBS RM's 9j x 15"

BBS RM's staggered 8 and 9j x 15"

And a few more 003's

**IronmanE30** · 06-15-2010, 04:32 PM

How hard would it be to find one RS 001 center and where would you look for one.

Cheers,

Jim

**jahnaboi** · 06-15-2010, 04:45 PM

My only bbs's.

**rav320uk** · 06-15-2010, 11:42 PM

Originally posted by IronmanE30

How hard would it be to find one RS 001 center and where would you look for one.

Cheers,

Jim

Normally German Fleebay

**Mapearso** · 06-17-2010, 10:31 AM

BBS Lorinser 3-Piece 16x8 ET11

This is a great thread. Given that this is all things BBS I wanted to post my BBS Lorinser wheels

* Model: BBS for Lorinser. I guess they are an RS variation, they are 34 hole.
* Height/Width/Offset: 16x8 ET11
* Purchased from: VW Vortex Forum
* Plans: Make a staggered set (Just bought new lips to take the rears to 16x9...) Refurbish everything. (They are currently chromed. Deciding whether to rechrome or take em down and polish them. Also need to decide whether to paint the centers body color. Also, I suppose if I dont paint the centers I could go with black bolts... The possibilities are endless.... :nice: )
* Refurbishment/Polishing Methods: TBD

Missing one half-height large thread hex nut and the flat center ring (BBS Part Number 09.24.116 If anyone has either of these please let me know!!

Thanks. And again, great thread, great wheels, great cars!!!

Attached Files