BBS Garage: All things BBS

[IronmanE30]

Getting ready to mount up the BBS Staggered Style 5 wheels on the 540.



Cheers,

Jim

[wakdog]

Put together one of my new BBS RS rears: 15x9.5 +11



still need to either properly polish the hex's, or buy some new ones...

[Poorboyz]

The white centers look great.

I just dropped off my set of (5) RC090s to get filled and re-drilled...pretty excited.

[Blackout]

Not sure if these are bbs or hre. Dope neverthelss...

[formula driver]

Put together one of my new BBS RS rears: 15x9.5 +11



still need to either properly polish the hex's, or buy some new ones...

So sweet man, and those are legit specs too.

Let me know if you decide to buy new hex caps, I designed what I believe to be the best hex caps on the market. They are 1/3rd height, are more light weight than the competition and have some cool design features.

Not sure if these are bbs or hre. Dope neverthelss...

Those are BBS

[ScottSneed]

Not sure if these are bbs or hre. Dope neverthelss...

i can dig it

[Aviator]

BBS RZ 378 4x100 15x7 et 20

[florida_dirt]

anyone redrill 5x120 rz's??

[formula driver]

anyone redrill 5x120 rz's??

Sure, I can do it!

:-)

[dmessent]

BBS RZ 378 4x100 15x7 et 20

Bronzit Centers? First daylight pic I've seen of that combo, they look really good.

[dzidziusbmw]

[florida_dirt]

Sure, I can do it!

:-)

how much do you charge?

[wark]

Thought I would share the refinishing journey of my LMs with you guys (sorry, no e30 content, just BBS!).

Picked them up from VRWheels, LM model 171, 18x8 +40, 5x114 redrilled to 5x112 by VRWheels. BBS Gold faces, black hardware, black/gold caps.





From the start I had planned on pulling them apart and doing something different with them. Started by stripping the whole barrel, powdercoated in the barrel, polished the lips. Faces were media blasted and anodized in clear leaving a raw aluminum look. New chrome hardware and polished BBS caps finished the look. I also reverse mounted the faces, making the ET +25.










Ran them like that for a year and then decided to change it up further. Pulled them apart again, took the faces to be powdercoated.





The final stage started last winter when I was able to find some 18x9 barrels, which I had powdercoated to match the faces and I polished the lips, swapped the rear faces onto the new barrels, and came out with this!







and one on the car:





Going to be building a set of RSs next, but for an e30 hopefully.

[formula driver]

how much do you charge?

Shoot me an email please.

info@ewheelworks.com

[IronmanE30]

Mounted up and ride height adjusted.



Cheers,

Jim