Announcement

Collapse
No announcement yet.

Volk Super Fine mesh Split Rims ??? Know anything about them ???

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
    #1

    Volk Super Fine mesh Split Rims ??? Know anything about them ???

    I'm looking at some Volk wheels. They're 4x100 and look really similar to BBS RS/RM wheels. I really don't know anything about them.

    - Are they valuable? (By that I mean are they worth refurbishing)
    - Can I get bigger lips for them?
    - Does anyone have them?

    The only things they really say on them are "Super Fine" "SF" and of course Volk and Rays engineering. They have all the centercaps, but do have curb rash and some minor dents that could be driven on but that always sucks.

    Here are some pics I've found (not of the actual ones):




    Well, posterity, you will never know what it cost us to preserve your freedom. I only hope that you will make a good use of it. If you do not, I shall repent in heaven that I ever took half the pains to preserve it.
    ~ John Adams ~
    Tags: None
    #2
    what size are they? are they the ones in the bigger picture? or the ones in the small pic with the 4 on the floor?

    Comment

      #3
      neither. Those aren't the actual ones, just pictures of the same type of wheels.

      They're 15" for sure and I think they 7" wide, but could be 6.5"

      Well, posterity, you will never know what it cost us to preserve your freedom. I only hope that you will make a good use of it. If you do not, I shall repent in heaven that I ever took half the pains to preserve it.
      ~ John Adams ~

      Comment

        #4
        Based on the fact that Volk mainly makes wheels for Honda and Toyotas, the offsets will be too high for them to run without spacers. You will probably need hubcentric spacers as well since the centerbore is probably different too. They may end up being 4x114.3 in some cases as well...

        All that, and buying larger lips (some companies will make them if you write up the specs) and refurbishing for a 15" wheel don't make it a good candidate. However, these usually bring good money since oldschool Volks are always desirable in Honda and Toyota crowds.
        Reminiscing...

        Comment

          #5
          Originally posted by M42Technik View Post
          Based on the fact that Volk mainly makes wheels for Honda and Toyotas, the offsets will be too high for them to run without spacers. You will probably need hubcentric spacers as well since the centerbore is probably different too. They may end up being 4x114.3 in some cases as well...

          All that, and buying larger lips (some companies will make them if you write up the specs) and refurbishing for a 15" wheel don't make it a good candidate. However, these usually bring good money since oldschool Volks are always desirable in Honda and Toyota crowds.
          The offset is 22 or 23 and they're 4x100. I've had them in my hands. They're pretty cool, but they do need refurbishing which is what holds me back. Now if only the guy would sell me his BBS RS003 wheels.

          Well, posterity, you will never know what it cost us to preserve your freedom. I only hope that you will make a good use of it. If you do not, I shall repent in heaven that I ever took half the pains to preserve it.
          ~ John Adams ~

          Comment

            #6
            seen them on a few jdm'ed out hatches.

            Comment

              #7
              Originally posted by Nicademus View Post
              The offset is 22 or 23 and they're 4x100. I've had them in my hands. They're pretty cool, but they do need refurbishing which is what holds me back. Now if only the guy would sell me his BBS RS003 wheels.
              Interesting, thats about the same specs as mine! Good luck getting RS003's, thats a pretty penny you'll have to pay.

              I'd say keep a look out for them, seems like a good fit, all they'll need are centering rings...
              Reminiscing...

              Comment

                #8
                Originally posted by M42Technik View Post
                Interesting, thats about the same specs as mine! Good luck getting RS003's, thats a pretty penny you'll have to pay.

                I'd say keep a look out for them, seems like a good fit, all they'll need are centering rings...
                I already have a guy who wants to sell me them for $200. The same guy has BBS RS003 wheels in great condition, Breyton wheels, and Racing Dynamics wheels.

                Well, posterity, you will never know what it cost us to preserve your freedom. I only hope that you will make a good use of it. If you do not, I shall repent in heaven that I ever took half the pains to preserve it.
                ~ John Adams ~

                Comment

                  #9
                  Um price on RS003's?
                  Reminiscing...

                  Comment

                    #10
                    Originally posted by M42Technik View Post
                    Um price on RS003's?
                    NO! if nicademus doesnt snag them i will.
                    ;)

                    Comment

                    Previous template Next
                    Working...
                    X