Hey guys I’ve been putting back together my 1985 325e after it caught on fire some 10 or so years ago. I’ve went ahead and replaced a million things in the engine bay. Including the engine harness. Now basically I’ve got some issues. I’ve been having a no spark or fuel issue. I’ve narrowed it down to the dme not getting any power. When I jump the fuel pump relay the pump runs and when I jump the main relay I get power to the dme and spark. I even got the thing to run on starter fluid with the main relay jumped. I’ve tried a few different relays which should work but I keep getting .3 volts or so at pin 18 and 35 unless it’s jumped. I’ve run out of ideas so please help!!!!
Comment