Announcement

Collapse
No announcement yet.

wanting to put an ITB on my e30

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    wanting to put an ITB on my e30

    i've been reading some information about itb. but i couldn't find a thread about how to set up an itb. i recently bought an 325iC. i am planning to put itb on it. i was wondering what will i need and roughly how much will i spend.... thanks

    #2
    ITB's & fabrication or dbilas dynamic...

    MS / custom tune

    $$$$$$$$$$



    edit: start Here and do some reading...

    Comment


      #3
      Do that ^ or, you can go with the dbilas manifold, like 600 bucks alone though, then buy either DCOE carbs and plug the injector holes in the manifold, or Jenvey DCOE flange throttle bodies. I'll be doing the latter, and making my own CF or FG airbox by using the lost foam method. This is for my m20 02 though by the way. I'll probably continue the engine build in octoberish. Check out the thread if you havent already :P

      Comment


        #4
        Are you building a race vert or is this for wow factor?

        If for the latter just do a motor swap.
        "We praise or find fault, depending on which of the two provides more opportunity for our powers of judgement to shine."

        Comment


          #5
          Forgot about this...



          They have ITB's and manifolds for the m20 and




          :up:

          Comment


            #6
            Originally posted by atomic View Post
            sweeeeet

            Comment


              #7
              It's a pretty sweet setup for sure.

              However, if you weren't going to do a full built-to-the-hilt M20 stroker build, ie, 3.0L or greater, big cam, headwork, GOOD header and exhaust, etc..........I don't see ITB's being worth the effort.

              For the cost of ITB's, getting them tuned, etc (not even counting if you decide to go with a custom plenum), you are getting into S50 swap range territory. And you still don't have a built M20.
              Need parts now? Need them cheap? steve@blunttech.com
              Chief Sales Officer, Midwest Division—Blunt Tech Industries

              www.gutenparts.com
              One stop shopping for NEW, USED and EURO PARTS!

              Comment


                #8
                Exactly what are you looking to get out of the ITB system? Maybe that will help explain to everybody your motives because I'm building an ITB setup but I'm also doing a complete stroker build in which case it makes sense but just on an m20 with nothing else?
                stephenbrody.com

                Comment


                  #9
                  good question. i just love the sound. in terms of the performance of the car i'm very innocent about what an ITB can do. I have friend back in the Philippines that has an ITB on a '83 Corolla and i love the sound of it. i was reading something couple of days ago, is it true that the ITB is also good for MPG?

                  Comment


                    #10
                    It is not worth it ,, except you do some more,, modification,, ((IMO))

                    cylinder head reworked,, new performance cam,, headers,, fuel system
                    (( incl, more pressure , and bigger injectors,, )) and YOU MUST get the ecu remapped ))

                    it is a costly tune ,, but you get a lot,,


                    but S50 EURO engine if you want the biggest gain from a 3.0L engine ,, easy install and LOT of POWER
                    Sveinbjörn Hrafnsson

                    E30 CABRIO V12 M70B50 ///
                    ALPINA B10 BITURBO 346 @ 507
                    E34 550 V12 JML


                    Finnish wisdom : If you want to Win,, hire a Finn

                    http://alpina.123.is/pictures/

                    Comment

                    Working...
                    X