If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
How do you know its rotated 3.46 times. Do I have to bust out trig to figure it out? I dont think you can tell the difference between 3.46 and 3.73.
You just have to count...
If you cant tell the difference between those two, then you arent paying attention. If you mark the driveshaft that 1/4 turn/90 degree difference is easy to spot.
Originally posted by Wh33lhop
You can't tell the difference between three and a half and three and 3/4?
Thanks Nate, that's exactly what I would have responded if you hadnt put it so nicely.
1. Goto a empty straight road
2. Look around for police
3. Stop vehicle
4. Depress the clutch pedal
5. Select first gear
6. Bring the engine speed to 5000rpm
7. Rapidly release the clutch pedal while simultaniously going WOT and hold for 2 Mississippi's, (The vehicle will lunge forward at a fast rate (Unless you're driving a 318i or ETA)
8. Stop vehicle
9. Get out of vehicle
10. If there are 2 rubber marks you have a LSD, if only 1, you have a Open diff or a POSLSD.
Comment