Need a clutch! Suggestions????Please help!!

[ediaz029]

So I replaced my lsd and now its the clutch too so I need a complete kit. Any suggestions as to wich one for a dd/track car just sometin so I can get to school and back without killin my leg but also giving me better than stock. Anything else I should upgrade/replace while I'm there?
Thanks so much any input is welcome!!

[ediaz029]

anyone???? I really need to figure this out

[SamE30e]

Just get a OE replacement.

[ediaz029]

I want to upgrade while Its out

[White325is]

What are you puting it in? 325e 325i? A stock clutch can hold very well.

[ediaz029]

1991 318is

[White325is]

M20 single mass flywheel and clutch will be a upgrade.

[BlackSpeed66]

Why do you feel you need to upgrade? Unless you're running some crazy turbo setup or an engine swap, a stock clutch will work just fine. I'm sure plenty of folks on here that DD, auto-x, or track their cars use the OE clutch as well. I do.

[ediaz029]

I already have an m20 flywheel so does the m20 clutch disks, pressure plate and throw bearing bolt right on?

[ediaz029]

and its not that I feel the need to upgrade I just wasnt sure what my best option was

[White325is]

I already have an m20 flywheel so does the m20 clutch disks, pressure plate and throw bearing bolt right on?

Yeah its direct swap. People use the M20 single mass and clutch for M50 swaps along with the 240 trans. Everyone says you need a euro 323 TO bearing but when I searched the M20 single mass and the euro 323 have the same part number on realoem.com

[quickervicar]

PM sent

[e30fish]

just curious, but does the new flywheel have to be balance matched to the old one?