Coming soon to Guten ITB's...

[ZM Blue Devil]

L, do you have any idea how much power is gained with the ITB's? For an S52 for example? Really nice stuff.

I dont, as we move forward we would like to dyno to see changes in hp, tq and the powerband.

[CorvallisBMW]

ooooohhhh I just jizzed in my pants while imagining a euro hi-comp m30b35 with 533i flywheel and ITBs.....

[fiftytakedowns]

While dbilas is certainly very cool, the key thing is to put together a system in which everything has been optimized to work together. Think of it this way:

• OPTION A: $3000 on a dbilas ITB setup
• OPTION B: $1500 on Extrudabody ITB's + $500 on Megasquirt conversion + $500 on headwork + $500 left over for setup & tuning

Which one will give you the best result in the end? On top of that, there's the coolness factor. I'd rather work with local vendors/shops to build a custom car rather than just writing a check and waiting for the UPS guy to deliver. More fun that way

Id much rather have the extrudabody setup, but dbilas has an itb setup that uses stock Afm, TPS, and is bolt on. That is quite appealing on its own.

[markseven]

L, do you have any idea how much power is gained with the ITB's? For an S52 for example? Really nice stuff.

[Emre]

While dbilas is certainly very cool, the key thing is to put together a system in which everything has been optimized to work together. Think of it this way:

• OPTION A: $3000 on a dbilas ITB setup
• OPTION B: $1500 on Extrudabody ITB's + $500 on Megasquirt conversion + $500 on headwork + $500 left over for setup & tuning

Which one will give you the best result in the end? On top of that, there's the coolness factor. I'd rather work with local vendors/shops to build a custom car rather than just writing a check and waiting for the UPS guy to deliver. More fun that way

[Huff]

Still can't get over the bad asss M10 pictured. You have my attention on this project/ product

[der affe]

shiiiiiit, i'd be stoked with the EMS, and keep my e-cred points. any ballpark ideas on pricing for the EMS system?
plug and play for the E-30?

[Dave]

Just to be clear - the picture below includes a custom plenum made by DTR Performance in Florence, KY. The owner of DTR (also named Kevin) has a build thread here in the forced induction forum. http://www.r3vlimited.com/board/showthread.php?t=144199

Kevin at DTR has built a number of bespoke turbo system cars using Extrudabody ITBs - they are a very good quality product. Extrudabody ITBs are on DTR's One Lap of America turbo M52 e30. http://www.buckeyebmwcca.org/buckeye...ber%202009.pdf

BMWs are not new to Kevin, he has MXX and SXX applications already. He and his company truly are not well known other then in a small car enthusiast community. This is why we are working with them to bring them to a larger audience.

Luke, pricing is on their site...
http://www.extrudabody.biz/servlet/StoreFront

Luigi, they are a complete shop, they have everything. Hang tight for details on the complete set up...

Buddy, they use cads and engineering to ensure proper fit and flow.

Like I said, he is not a hack welding crap together to make it work. Everything is engineered, tested and tuned prior to brining to market.

L

[Jean]

The ITB's and hardware look good! I would love to see/hear a video of m30b35 with it :)

[Jesse30]

would like to see m42 stuff :d

+1 :)

[fiftytakedowns]

would like to see m42 stuff :D

[ZM Blue Devil]

stayed tune for a upcoming project with Kevins stuff. It will make you forget Dbilas... Thats a Guten promise.

[Red88]

meh, it is not dbilas...says the elitist dbilas prick. j/k looks great!

--Damn you!

[der affe]

meh, it is not dbilas...says the elitist dbilas prick. j/k looks great!

[ZM Blue Devil]

Check with Levent of the M10/M20/M30 stuff!

Thanks
Buttbump!

fixed...;)