should i buy these rims

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • newman
    E30 Enthusiast
    • Mar 2007
    • 1159

    #16
    Originally posted by Stephen
    Whats the specs? and my wheels do not sit out too far.


    My guess is they are the exact same specs as mine, and ive already dealt with that headache
    Well, if that's your car in your sig, I would say they stick out about an inch too far in the front and have tires that are far too small on all 4 corners.

    1987 325is: 495whp/400ft-lb
    UPDATED 03/12/10!: RB26DETT Swapped E30

    Comment

    • KillaCam
      R3VLimited
      • Jun 2009
      • 2103

      #17
      Originally posted by widebodye30
      ::crazy::crazy::crazy:


      Thanks Matt!

      Either way Im just trying to help.... for a couple hundred extra you can get a wheel that will be a DIRECT fit for your car and they will be brand new with 4" polished lips on the back and 3" on the fronts with the right offsets for the e30.

      For the few hundred extra personally I think the best thing to do is to get ones that are ready to go because in the end you will end up spending almost as much to make em fit RIGHT.

      Thanks,
      I would get them if i had the cash but i am going to make him a offer.....but you have a point on me spend as much but i never buy anything used at asking price..... Unless its worth it
      Originally posted by E30_(1st Musk)_
      HONDA IS WHERE EVERY TREND DIES! .

      24v swap Oil Pan..F/S

      Comment

      • Jonny Cash
        E30 Mastermind
        • Sep 2008
        • 1763

        #18
        Originally posted by accident
        fuck you and your shitty knockoff wheels.
        .
        eeasy cowboy, have some respect. The guy's a paying vendor.

        I personally would stay away from these wheels.
        -Jay

        2014 NASA FL se30 champ #81
        2001 se46 3 year plan in progress


        Comment

        • Stephen
          Шлем ишака
          • Aug 2008
          • 10774

          #19
          Originally posted by newman
          Well, if that's your car in your sig, I would say they stick out about an inch too far in the front and have tires that are far too small on all 4 corners.
          i wouldnt


          heres with my adapters KillaCam

          Comment

          • bataangpinoy
            E30 Mastermind
            • Jul 2008
            • 1636

            #20
            wowza stephen you really did the math on those puppies. its an early model, im assuming you didnt roll the rears?
            My feedback:
            http://www.r3vlimited.com/board/showthread.php?t=186328

            http://e30tech.com/forum/showthread.php?t=74911

            Instagram:
            @gears_n_glory

            @functionmotorsports

            Comment

            • Stephen
              Шлем ишака
              • Aug 2008
              • 10774

              #21
              Originally posted by bataangpinoy
              wowza stephen you really did the math on those puppies. its an early model, im assuming you didnt roll the rears?
              No i did, and still need to roll more, the rear has come down a touch since that pic:p


              And yes, early arches

              Comment

              • newman
                E30 Enthusiast
                • Mar 2007
                • 1159

                #22
                Originally posted by Stephen
                No i did, and still need to roll more, the rear has come down a touch since that pic:p


                And yes, early arches
                Needs bigger tires for sure. And it's too low. And those are the rear wheels. I said the front wheels didn't fit...

                Sorry, I just think stretched tires are the stupidest thing in the whole world.

                But carry on. Sorry for going OT.

                1987 325is: 495whp/400ft-lb
                UPDATED 03/12/10!: RB26DETT Swapped E30

                Comment

                • Stephen
                  Шлем ишака
                  • Aug 2008
                  • 10774

                  #23
                  Originally posted by newman
                  Needs bigger tires for sure. And it's too low. And those are the rear wheels. I said the front wheels didn't fit...
                  i like it. 205s plenty of grip, and i dont care to lift it. I dont like fender gap on 17s

                  I dont have a current shot of the front, but its just about the same, just a few mms further out


                  anyway, this is kinda OT now. OP, do you have the wheel specs?

                  Comment

                  • george graves
                    I waste 90% of my day here and all I got was this stupid title
                    • Oct 2003
                    • 19986

                    #24
                    Originally posted by Strelok
                    I've heard nothing but bad about adapters. Don't half ass it.
                    I've heard nothing but good thing about adapters.
                    Originally posted by Matt-B
                    hey does anyone know anyone who gets upset and makes electronics?

                    Comment

                    • Matt-B
                      The Waffler
                      • Jun 2009
                      • 3856

                      #25
                      redrilling is going to run you 120-150 for 4x100 at lax wheels


                      Please leave feedback below, thanks

                      http://www.r3vlimited.com/board/showthread.php?t=358170

                      Comment

                      • KillaCam
                        R3VLimited
                        • Jun 2009
                        • 2103

                        #26
                        Originally posted by Matt-B
                        redrilling is going to run you 120-150 for 4x100 at lax wheels
                        really cool well that price isnt bad
                        Originally posted by E30_(1st Musk)_
                        HONDA IS WHERE EVERY TREND DIES! .

                        24v swap Oil Pan..F/S

                        Comment

                        • Stephen
                          Шлем ишака
                          • Aug 2008
                          • 10774

                          #27
                          and yes, you should buy them if you like them, or link me so i can have backups

                          Comment

                          • KillaCam
                            R3VLimited
                            • Jun 2009
                            • 2103

                            #28
                            Originally posted by Stephen
                            and yes, you should buy them if you like them, or link me so i can have backups
                            I think I will buy them I am waiting for the guy to email me back
                            Originally posted by E30_(1st Musk)_
                            HONDA IS WHERE EVERY TREND DIES! .

                            24v swap Oil Pan..F/S

                            Comment

                            • KillaCam
                              R3VLimited
                              • Jun 2009
                              • 2103

                              #29
                              what about the seats
                              Originally posted by E30_(1st Musk)_
                              HONDA IS WHERE EVERY TREND DIES! .

                              24v swap Oil Pan..F/S

                              Comment

                              • Jesse30
                                No R3VLimiter
                                • Jan 2007
                                • 3936

                                #30
                                yes on the wheels. get adapters.


                                no on the seats. those things belong in an 88 prelude

                                Comment

                                Working...