Required E30 tools

[pawi30]

For timing belt replacement.

12 mm for crank bolt disk
32mm for fan clutch, get it from a bike shop

[87-325ic]

32mm is for the real trans flange and seal. probably other stuff too.

get a bentley, and a 8 10 and 13 mm socket and you can do almost everything.
dont forget the bmw toolbox screwdriver.

dont forget the valve feeler gauges too.

[KennyT]

Already have the electrical kit (two years in electrical engineering), along with most of what has been mentioned. I'm looking for the various oddball tools, like what pawi mentioned.

pawi - What do I need the 32mm wrench and 12mm socket for?

[pawi30]

thin 32mm wrench
2" deepsockset EDIT: 12mm
torx set
jack
x4 jack stands

[StereoInstaller1]

Test light, DMM, crimpers, stethoscope.

[drumad]

metric everything
pipe wrench
torch
wd40
pb blaster
dremel
drill
vice grips
bfh
a shit ton of various all thread/nuts/washers (for pulling bullshit)

huh?

[KennyT]

What tools are must have for working on E30's. I don't have a large set of tools yet and I'm trying to figure out what I need, not just what would be nice.

Stereo removal tool was the first BMW specific thing I have purchased. What else do I need?