I have a decent set, I've been using them for a couple years. I'll look into a skewdriver.
-
-
You will wish you had invented them...they are a HUGE help.
What screw gun do you have? I just switched over to the Milwaukee M12 system. Very decent stuff IMO.
Closing SOON!"LAST CHANCE FOR G.A.S." DEAL IS ON NOW
Luke AT germanaudiospecialties DOT com or text 425-761-6450, or for quickest answers, call me at the shop 360-669-0398
Thanks for 10 years of fun!Comment
-
get a 8,10,12,13,15,17 set of sockets, deep sockets, and ratchet wrenches, and I think you could take nearly the whole car apartComment
-
Do I need the 30mm or 36 for pulling the rear axles?Comment
-
30mm rear and 36mm front. To actually remove the hub in the rear you'll at the minimum need a slide hammer. Mine were in there so good, that I just paid a shop to press out and press in new ones. Up front you can just use a 2 or 3 jaw gear puller to remove the hub. In my experience impact "spindle sockets" are too thick, and I have resorted to using 12pt 30mm and 36mm chrome sockets from sears. Wear a good face mask if using an impact on chrome sockets though. None have exploded on me yet, but they are definitely looking abused.Comment
-
i love my electric impact gun. i took apart an entire e30 suspension and put it back together on one charge.
Originally posted by ROLLingKINGOriginally posted by slammin.e28Comment
-
Comment