-
-
pretty much what joe G said but don't forget your probably going to want to have 3inch 5inch and 8inch ratchet drive extensions. they come in handy for so many jobs. pneumatic tools don't hurt either ;)Leave a comment:
-
1) bentley is the e30 bible. Use it and you will go far.
2) ratchets (1/4", 3/8", 1/2" drive), metric sockets 8mm-22mm would be most commonly used, set of metric wrenches(same sizes as sockets), screwdrivers, vice grips, big c-clamp(for brakes), 8mm hex (right size for caliper bracket if my memory serves).
Also might want to get a couple more jack stands, some gloves, and safety goggles.
That should give you a good base line, but for the most part you'll really accumulate tools as you do more work. Its a pretty expensive endeavor to buy EVERYTHING you need all at once. Start small and add to the collection over time.Leave a comment:
-
First time E30 owner, got some questions.
19 here currently going to college, recently just picked up my first e30 (also have a e90 330i, but always wanted an e30). 1988 325i Vert, Zinno on tan w/ approximately 200k (broken odo). Just have a couple questions.
I'm pretty handy, I have a simple toolbox, drill, bits, jack, and 2 jack stands. I want to start doing maintenance on the car as much as I can by myself versus paying a mechanic. What would be some basic tools I should pickup?
For example, brakes are coming up soon, and I'd like to change the oil myself, any suggestions?
And aside from the bently manual (found it hard to follow/pretty old) what other literature would be useful for me to start reading?
Here's a pic right after I got it detailed a day after picking her up.Attached Files -
Leave a comment: