Split shipping cost NW on a pallet of Euro Parts? UPDATE 4!!

[KenC]

I've been talking to Jon from the UK for a while and he is going to be able to ship an entire pallet of euro parts for about $280. The pallet would be shipped into a sea port. I was thinking that if any of you guys who live in the NW wanted some euro parts, you could get them from Jon and go in on shipping charges. Ideally the pallet would be shipped into the Port of Portland (for WA and OR people... maybe Kris if he wants to take a road trip :D ).

This is a great oppertunity to get some large parts shipped very cheaply (Im getting chrome bumpers, a valence, and an mtech1 airdam). Even if only four people go in on shipping it would be really cheap, especially considering that the stuff would be coming from half way around the world. Jon has two sets of 15" euro basketweaves and many other euro parts, possibly some more sets of euro bumpers. Contact Jon and see what he has; and then we'll get it all together and ship it over really cheaply!

Either reply to this or PM if interested. I know there are a lot of you Pacific-Northwesters out there who are wanting some euro parts.. now we can get them shipped over for a very nice price. :D

[bimmerphile]

hmmmm.....

[Erick]

If anyone wants to hold off some parts for me, I have a small list of my own that if you pick it up for me and ship it to FL, I would be very greatful.

[randomtask37]

how much were those 15 inch weaves selling for? and do they have tires? condition?

and how much were the euro bumpers?

its all about the bling yo! :roll:

[jonb]

hello people.

its jon here. :D

randomtask

im going to get my baskets sorted tommorow. i will have to check the condition. but in my opinion it would be better to send the rims without the tires.

also the bumpers i have at the moment are pritty much taken for.(ken,dave cn) :) . but i will like to source many more before this palet will be comming to the u.s.

i think we should club up some good interest with this. and as ken said the shipping cost for every individual will be so low.

ive been informed by the company that the palate is one cubic metre. so thats a lot of parts.

ive informed a few people of this already, but for the rest of you, i maybe able to get hold of some brandnew crome bumpers.

eitherway the bumpers will be supplyed with all the fittings.

im not sure which is the best way to do this, but you can either mail me with your requirments. or get in touch with ken. so he can keep a log of all the people who are interested and the parts they are after. :)

thanks people 8)

btw ken. very close to getting the bumpers in. although it maybe delayed untill tommorow(ive got someone comming to buy the zenders so im stuck at my garage at the moment)

[tobybmw]

Jon.
I would be interested in a grey rear shelf with sun shade. Problem is shipping it over here with the rest of the bumpers and wheels. It might get damaged. (no good) Also I am looking for 3 center caps for the Hartge Design a Wheels 16" (11 spoke).
Thanks
Andy

[ColdAccord]

any info on an M tec I rear bumper and apron?

[KenC]

any info on an M tec I rear bumper and apron?

Isn't the Mtech1 rear bumper just the regular euro chrome bumper? And then the apron is attatched to it...

[KenC]

hmmmm.....

We know you're lookin' for some mtech2 stuff... 8)

[Ryan Stewart]

any dish on headlight wipers?

[KenC]

Jon.
I would be interested in a grey rear shelf with sun shade. Problem is shipping it over here with the rest of the bumpers and wheels. It might get damaged. (no good) Also I am looking for 3 center caps for the Hartge Design a Wheels 16" (11 spoke).
Thanks
Andy

I'm sure Jon can manage to package things so that they don't get damaged.

Jon, there will also be insurance available on the items correct? Also, what about tracking such a package?

[KenC]

If anyone wants to hold off some parts for me, I have a small list of my own that if you pick it up for me and ship it to FL, I would be very greatful.

What parts are they? It would be the best deal to get larger items shipped over. I'm sure some one over here would be able to ship them down to FL.

[jonb]

toby

again. i can source a rear blind shelf for you. it would be packaged sufficently. i doubt if i could find any hartge centre caps though :o

ken

i would be suprised if there wasnt insurance on the items. same goes for tracking.

coldaccord

i have an m-tec one comming in. but i wanted to sell the kit as a whole. but inturn if theres someone interested in the front spoiler(james?) and sideskirts then theres no problems at all.

ryan

bare with me on the wipers. im i right in thinking that you want the whole set up. motors and all?

thank

[Erick]

If anyone wants to hold off some parts for me, I have a small list of my own that if you pick it up for me and ship it to FL, I would be very greatful.

What parts are they? It would be the best deal to get larger items shipped over. I'm sure some one over here would be able to ship them down to FL.

Euro rear plate filler
Euro bumper trims
Euro instrument cluster

Those are the top 3 on my euro wish list. If I think of anything else I'll post it.

[KenC]

If anyone wants to hold off some parts for me, I have a small list of my own that if you pick it up for me and ship it to FL, I would be very greatful.

What parts are they? It would be the best deal to get larger items shipped over. I'm sure some one over here would be able to ship them down to FL.

Euro rear plate filler
Euro bumper trims
Euro instrument cluster

Those are the top 3 on my euro wish list. If I think of anything else I'll post it.

Just talk directly to Jon about the parts you want. I'm just trying to deal with shipping them. But those would be easy to ship from the NW.