Announcement

Collapse
No announcement yet.

This is your Favorite non-r3v Build Threads.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Ether-D
    replied




    Sorry the pics are so big. I'm gay for this bike.
    I built a bobber/whoknowswhatthefuckitwas a few years back out of a 1979 yamaha xs450. While researching pics and stuff for inspiration, I found this build.
    This kid is good
    Last edited by Ether-D; 07-26-2014, 06:16 AM.

    Leave a comment:


  • tom d
    replied

    Leave a comment:


  • tom d
    replied


    Last edited by tom d; 07-25-2014, 09:53 PM.

    Leave a comment:


  • tom d
    replied
    I like to play with wood.



    Last edited by tom d; 07-25-2014, 09:55 PM.

    Leave a comment:


  • Farbin Kaiber
    replied
    ^where is the thread?

    Leave a comment:


  • tig welder
    replied
    Built from the remnants of a Buell S1:

    Most of the build thread was over on "clubchopper.com" under my tag name PACO. Unfortunately lots of the pix & details were lost due to hacking on that site. It's mentioned in some of my other parts pieces individually built but the bulk is gone.

    Last edited by tig welder; 07-25-2014, 07:45 PM.

    Leave a comment:


  • mrsleeve
    replied
    My brothers. Has not been updated but car is on the road making 485 at the wheel at 12psi with a MASSIVE intake restriction at the stock 68mm throttle body and mystery injector issue. Though we think its the spray patten of his injectors not playing well with piston and combustion chamber geography. Both issues should be fixed by next month and back for another dyno session should make well over 500 at 1 bar

    Leave a comment:


  • LJ851
    replied
    Seen any more quality build threads?

    Leave a comment:


  • kingston
    replied
    Originally posted by LJ851 View Post
    Will posted this in another thread, ridiculous.
    Holy Mother of God! Speechless!

    Leave a comment:


  • amcink
    replied
    Originally posted by Bullet Ride View Post
    trololol...



    That sounds like a construction zone. I laughed so hard!

    Leave a comment:


  • LJ851
    replied
    Will posted this in another thread, ridiculous.

    Originally posted by The Dark Side of Will View Post

    Guy who adapted Ferrari Testarossa DOHC 4V cylinder heads to a 400i block (originally SOHC 2V like an M20) to build his own 48V V12 for installation in a 308:


    He all but built his block out of welding rod, including filling 400i head bolt holes to re-drill the Testarossa head bolt pattern; made his own cam blanks... etc.

    Leave a comment:


  • bruner
    replied
    I have no favorite non-r3v build threads;)

    Leave a comment:


  • LJ851
    replied
    Originally posted by graveshaker View Post
    Joined this forum recently when I purchased my sand rail. Came across this thread and thought I share.

    http://www.thesamba.com/vw/forum/viewtopic.php?t=344748


    Thanks !

    Leave a comment:


  • LJ851
    replied
    time for more!

    Leave a comment:


  • dillon7
    replied

    Leave a comment:

Working...
X