so i am replacing my rear pads and rotors on my 87 325e, the caliper is off the pads are off, the allen head screw is out, the wheel stud are out. the rotor will not come off, i can grab and pull from where the caliper was but it seems to be hanging up on something towards the front of the car. is there something i'm missing? and the car has ABS i'm pretty sure, does that have something to do? please help, trying to do this tonight
help! rear brakes
Collapse
X
-
Tags: None
-
brakes
i tried that but it really feels like there is a spring or something pulling back when i pull on it by hand, i can pull the one side out maybe a centimeter then it just spings back.1989 325i Alpine s52 coupe
2003 540i M-Sport 6 speed
2003 X5 3.0Comment
-
tap around the face of the rotor with a big rubber dead blow hammer, then whack it from behind a couple of times.
Comment
-
a. Im ashamed for this forum that it took to the 4th post for this.Originally posted by cthulu703It feels like a spring because there is one. Make sure your parking brake is off, you are pulling against the parking brake shoes.
b. tech forum, tech forum, tech forum.
c. Get a Bentely Service Manual, it will save you from shitting a brick over something like this while waiting for the correct response on an internet forum.Im now E30less.
sigpicComment
-
Are you serial?Originally posted by Ryan Stewarta. Im ashamed for this forum that it took to the 4th post for this.
b. tech forum, tech forum, tech forum.
c. Get a Bentely Service Manual, it will save you from shitting a brick over something like this while waiting for the correct response on an internet forum.
-CharlieSwing wild, brake later, don't apologize.
'89 324d, '76 02, '98 318ti, '03 Z4, '07 MCS, '07 F800s - Bonafide BMW elitist prick.FYYFFComment


Comment