Feelin out Item might sell

[Master Fab]

Hello all, first post lol not really iv been on this site since it was created , Harry an I created this lip for multiple reasons , for durability , for people who have extremely lowered cars like Harry , for people who have damaged mounting points , un like an oem lip you can pick the length of your lip , require 5 to 9 3mm holes to be drilled depending on your application rufly 10mm from the bottom of the bumper , 5 3mm holes will not depreciate the value of your late 80s bmw , There will be no DIY post on this lip , Price is 70.00 shipped , this lip would be the last lip you will ever have to purchase , an if for some reason the lip is to be cracked contact me and I will send you a new one for price of shipping an 10.00 , feel free to contact me 352 428 2207 please leave a voice mail as I am extremely busy

[nando]

no diy? how will I ever figure out how to trim some garden flashing and use a self drilling screw? :(

[ST1G]

Hello all, first post lol not really iv been on this site since it was created , Harry an I created this lip for multiple reasons , for durability , for people who have extremely lowered cars like Harry , for people who have damaged mounting points , un like an oem lip you can pick the length of your lip , require 5 to 9 3mm holes to be drilled depending on your application rufly 10mm from the bottom of the bumper , 5 3mm holes will not depreciate the value of your late 80s bmw , There will be no DIY post on this lip , Price is 70.00 shipped , this lip would be the last lip you will ever have to purchase , an if for some reason the lip is to be cracked contact me and I will send you a new one for price of shipping an 10.00 , feel free to contact me 352 428 2207 please leave a voice mail as I am extremely busy

OP has the best marketing team on R3v.

[slammin.e28]

I want my garden flashing lip to go all the way around the car.

DO YOU OFFER A KIT FOR THIS!?

[Master Fab]

no diy? how will I ever figure out how to trim some garden flashing and use a self drilling screw? :(

This product is being cut from a 4x8 sheet ,,,,,,, please you do it your self lol

[Master Fab]

I want my garden flashing lip to go all the way around the car.

DO YOU OFFER A KIT FOR THIS!?

4x8 sheet buddy this isn't bullshit ,

[ST1G]

I want my garden flashing lip to go all the way around the car.

DO YOU OFFER A KIT FOR THIS!?

I got to start charging for this shit. Full write up coming soon!

[slammin.e28]

I got to start charging for this shit.

SRSLY dude, you do. This isn't bullshit.

[HarryPotter]

It's not garden siding lol

[tinkerputzer]

http://www.amazon.com/gp/aw/d/B009F10RVC?vs=1

[Master Fab]

Ok for the shit talkers , let's clear the hot air in your heads , it's a 2mm 4x8 plastic sheet , in turn is heated pressed to get lines you see in the photo , which gives the 2mm sheet rigidity , making it the most durable lip iv ever made ,,,, end of story stfu

[GunMetalGrey]

require 5 to 9 3mm holes to be drilled depending on your application rufly 10mm from the bottom of the bumper , 5 3mm holes will not depreciate the value of your late 80s bmw , There will be no DIY post on this lip

The small holes may not depreciate the value of your car, but the lip/garage door seal/garden edging sure will!
I didn't expect this thread to continue being hilarious, I was wrong.

[HarryPotter]

fuggggg ittttt

[HarryPotter]

Just need me some big titties in mah face

[Mr. Tasty]

what is, this, I don't even, what.