2015 Drive 4 Corners Registration Now Open!

[downforce22]

The 5th Annual Drive 4 Corners Regional BMW meet is only about 4 months away! Registration is now open and the D4C team is pleased to announce we have capped registration at 125 vehicles. Last year had a great turnout of over 100 cars.

Visit the website at www.drive4corners.com and don't forget to register before prices go up!

http://drive4corners.com/d4c-2015-registration-open/

Andy Caperones' (of Santa Fe BMW) M20b27 Turbo




















Full album located here in high resolution (too big to post in this thread):

http://pajohnston.deviantart.com/gallery/53839199/Drive-4-Corners-2014

;D

See you in 4 months!

http://drive4corners.com/d4c-2015-registration-open/

[downforce22]

Registration 25% full after 1 week.

Would you guys be interested in some Drive4Corners Pint Glasses? Currently deciding on swag. Here is an idea of what it would look like.

[downforce22]

There are 36 registered as of now. About 3 months out and we 4 e30s signed up. Who else is coming?

http://drive4corners.com/2015-attendee-list/

[downforce22]

Come on e30s ftw!! As of today.

[downforce22]

We are 3 months out and the event is 1/3 full. Sign up before registration prices go up or the event fills.. which ever happens first!

e30's now with the overall chassis lead!!!!

:popcorn:

[downforce22]

E30's still with the lead and 48 cars registered. Less than 3 months away, get you spot now!

[downforce22]

Registration is about half full, 62 cars signed up and counting every day. Sign up before you can't!

[downforce22]

Great news, the 'Lucifer's Hammer' e28 M5 Turbo has signed up!! And that brings us to 65 registered. Full details at link.


1988 E28M5 S38B40TL "Lucifer's Hammer"

"By the pricking in my thumbs, something wicked this way comes." W. Shakespeare: Macbeth, Act IV, Scene 1.

"Like a freight train on crack with a steroid enema."




Motor
Engine configuration: S38B40TL 4 valves/cyl, 4 liters (3986 cc) turbocharged inline 6-cylinder.
Motor built by Paul Burke Imagineering, Knob Noster, MO
Tuning and engine management systems by MileHigh Performance, Englewood, CO
Driveline and suspension by Bimmerhaus, Broomfield, CO

Outputs:
RWHP = 707+ hp @ 5700 rpm. RWTQ = 725+ ft-lb @ 4900 rpm.
Boost level = 14.95 psi
(These are SAE compensated values taken on an eddy current chassis dyno)

http://www.mye28.com/viewtopic.php?t=26880

[tschultz]

Indeed. I rode in the car last weekend and if was quite impressive.
6psi at 6000ft and it pulls as much at 100mph in 3rd gear as most cars in 2nd and 45mph.


We have some good representation so far also. 7 E30's, 6 E28's, and 5 E39's.

[downforce22]

87 signed up an coming up quick! Sign up before registration closes!!

[downforce22]

prices increase tomorrow and we are at 94 right now. Get in while you can!