Hi Guys,
Do any of you know if there is an upgrade to stock axles?
Do any of you know if there is an upgrade to stock axles?
-
1988 M3 (Diamondshwartz)
2004 M3 (SilverGray)
-
Not sure, I do seem to remember Diego fabbing some of his own...Originally posted by e30ryan///m3 View Post
Trevor Ely
'95 M Sport 540i - '00 A4 1.8TQMS - '85 190E 2.3-16
'88 535is - '87 325e - '89 325is - '91 318is - '90 325is - '96 328is -
if i remember correctly i think jordan used the beefy MZ3 halfshafts without modfication on his e30....i could be wrong.Comment
-
mz3 is larger than stock (u joints, and actual diameter)
you can use mz3 differential output flanges, z3m axles, and z3m rear hubs, and get a 5 lug setup for the rearComment
-
With an MZ3 setup, you can use Euro M3 halfshafts, which are the same thickness, but are hollow - thus being lighter and stiffer.
SILBER COMBAT UNIT DELTA (M-Technic Marshal)
RTFM:http://www.r3vlimited.com/board/showthread.php?t=56950Comment
-
you could do the e28 shafts since they bolt to the hub of the wheel...Comment
-
I have a set of MZ3 half shafts what else would I need to install these? I also have a set of e36 rear trailing arms and hubs
Oh and I forgot to mention that it is on an e30 m3 so it is already 5 lug1988 M3 (Diamondshwartz)
2004 M3 (SilverGray)
Comment
Comment