lots of questions!?!?!

[ctownhawk]

first off, love R3V, it's the shit. okay, so i've got a few things coming up that i'm wanting to fix.

1.i'm looking for the part number of the washer/plastic screw that holds the dash panel together which is under the steering wheel. i have the top screws all connected, but the bottom one came undone when i hit a bump (i think) and now i have to keep that panel up with my foot on the dead pedal whenever i drive. also would not like to resort to duct tape.

2.rear plate filler... i've seen 2 types.. which one is flush with the license plate, and which one has the 2 ends stick out to the tail lights.

3.how much does a set of used euro smileys run for (no cracks, etc)

4. Euro bumper trim swap, or use the bondo/fiberglass DIY guide and save some $$.

6. Is it true that blunt like little boy penises? saw that floating around...

7. i'm soon going to be needing new rotors. BBK seems pricey, and from what i hear, overkill for spirited street driving. stock rotors/upgraded pads? i saw turnerms had a bundle for around 200 USD.

8. Teaguer hit me up with a pm, got a few questions on paint.

[Court M3]

1. realoembmw.com
2. http://www.r3vlimited.com/board/showthread.php?t=49992
3 what ever you are willing to pay. usually ~$180-250ish

[kellie]

1. Just go to the dealer. They can look it up and it'll cost like $2.

4. While you're there, either order Euro trim, or get the part number and order it online. It isn't that expensive, just do it right.

7. OEM rotors plus upgraded pads, SS brake lines and a brake flush should serve you just fine for a street car.

[Jscotty]

6. No, its the other way around.

[xLibelle]

5. yes, you will want to become one of blunt's subjects. here's blunt

[JasonC]

3. i got mine for $85 with some pitting and no cracks, but the adjusters needed replaced.

6. LOL