Building a stroker?

[327istroker]

Hey guys I am working on turning my `89 325i into a 327i stroker. I have a 524td crank and e rods. Wondering if you had any info on what pistons to use or the best rod piston set up to get a higher compression ratio. Thanks

[Jand3rson]

http://www.strictlyeta.net/technical/328i_1.html

READ.

[modifiede30]

Do you ever intend to turbocharge the stroker? If so, you'd want low compression. If not, you can use super eta pistons with a little machining and get to about 9.5:1. Otherwise, you're stuck with custom pistons or machining m20/b25 pistons. In both cases, you can dictate your own compression.

[Jon325i]

Well I see you're a newbie here. The topic of stroker engines has been talked about extensively.

Try using the feature. I'm sure you will find some answers. Good luck and welcome :D

Jon