I prefer not to use long Allen in this case. Too much windup on the 8mm hex shaft. Those bolts are torqued to around 40 lbs-ft IIRC, so if you're using a breaker bar at the junkyard, you could break the allen before you remove 12 bolts.
Hell what am I saying, Careful's in SD, there is no rust. Just go there with a 3/8" finger ratchet and a 8mm allen socket.
Hell what am I saying, Careful's in SD, there is no rust. Just go there with a 3/8" finger ratchet and a 8mm allen socket.



R.I.P 07/01/09 - 04/23/10 :(

Comment