Toughest job in an e30?

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • Mastrcruse
    replied
    The worst job I have done on the e30 is trying to get the exhaust off and then trying to get the mani's off of the M30 while in the car. They were rusted to shit and I had to grind one of the nuts off but other than that, is hasn't been too bad.

    Leave a comment:


  • drift
    replied
    DIY heater thermostat ( by the firewall) , very very tight space.

    Leave a comment:


  • Erick
    replied
    Originally posted by redbull 325is
    welding the touring ass end on a sedan.
    or making it bat-shit fast.

    Leave a comment:


  • neighborhood
    replied
    I'd have to say either the entire rear sub-frame/suspension, or the oil pan,i've had to do them both.

    Leave a comment:


  • buhnahnuh
    replied
    Originally posted by LINUS
    getting a chick to ride in it.
    +1 my car is always dirty and full of stuff

    Leave a comment:


  • Tom944
    replied
    It all isn't too hard but the rear subframebushings is not something I look forward too doing.

    Leave a comment:


  • dvs909
    replied
    Not R3ving it
    ________
    Strain index
    Last edited by dvs909; 03-03-2011, 05:23 AM.

    Leave a comment:


  • 92 mtechnic cabrio
    replied
    Originally posted by LINUS
    getting a chick to ride in it.


    hay guyz!!!

    ITS FUNNY CAUSE ITS TRUE!

    Leave a comment:


  • redbull 325is
    replied
    welding the touring ass end on a sedan.

    Leave a comment:


  • homegrone30
    replied
    Originally posted by rwdrift
    Wow, I had to take mine out because I dropped a nut down the oil return in the cylinder head. Took me about an hour from start to finish with nothing but conventional tools and a cherry picker. Surprisingly had a hell of a time finding the right order for the bellhousing oilpan cover. All the bolts are different lengths.
    all i had was a pair of jackstands and a floorjack i only dream of a cherrypicker

    Leave a comment:


  • LINUS
    replied
    getting a chick to ride in it.

    Leave a comment:


  • Ablice
    replied
    Dash is not easy, fiddly work. But it was out in 3 hours by myself, first time. Then again I knew half of what to remove.

    Hardest work that makes you want to bazooka the car? The instrument cluster of the old eta. glad she's gone. Thing I wished never happened? the 325is wreck.

    Leave a comment:


  • Erick
    replied
    Originally posted by homegrone30
    oil pan on the car was the hardest job for me but i havnt done entirly too much
    Wow, I had to take mine out because I dropped a nut down the oil return in the cylinder head. Took me about an hour from start to finish with nothing but conventional tools and a cherry picker. Surprisingly had a hell of a time finding the right order for the bellhousing oilpan cover. All the bolts are different lengths.

    Leave a comment:


  • PaintPro21
    replied
    maybe I'm a bitch but I had a pain in the ass time replacing the clutch master cylinder (which ever one is under th dash board). Nothing pisses me off more then working in small, sharp, dark areas with fluid on the inside of the car. :(

    Leave a comment:


  • homegrone30
    replied
    oil pan on the car was the hardest job for me but i havnt done entirly too much

    Leave a comment:

Working...