Setting up a booth

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • TwoJ's
    R3V Elite
    • Oct 2005
    • 4908

    #1

    Setting up a booth

    I am going to be spraying primer on my car in my garage. Actually, my friend will probably be spraying while I watch. I've got a 2 car garage with plenty of room, but I need to set up some kind of faux temporary booth. I will be having a pro paint it, I'm just doing primer in my garage. I'm thinking that a stick frame built from 2x4's and some quality plastic will do the job. I'll also have a large box fan blowing out and a large HVAC filter for the intake.

    I'm wondering if any of you have done something similar and have any tips? Anything I should be wary of? I'll be meticulously cleaning everything as well so there should be minimal or no dust.

  • JasonC
    Site Manager
    • Aug 2006
    • 14451

    #2
    My dad had something similer set up when we lived in IL. He just put up plastic and had a exhaust fan in the wall. He primed and painted cars that way. I can't believe how little dirt got in the paint. The little that got in it wet sanded and buffed out.

    1992 BMW 325iC
    1978 Chevrolet Monte Carlo
    1965 Chevrolet Corvair Monza 140hp

    Comment

    • Farbin Kaiber
      Lil' Puppet
      • Jul 2007
      • 29502

      #3
      There was a How-To on wikiHow, but, use PVC pipe instead of 2x4's as it is easy to put together, take apart.

      Comment

      • TwoJ's
        R3V Elite
        • Oct 2005
        • 4908

        #4
        Originally posted by Farbin Kaiber
        There was a How-To on wikiHow, but, use PVC pipe instead of 2x4's as it is easy to put together, take apart.
        Good thinking. How would you attach the plastic to the pvc? Just duct tape? I've got some spare pvc and a cutter from when I repaired my sprinkler system.

        I'll check out the wiki.

        Comment

        • roundel
          Advanced Member
          • Aug 2007
          • 111

          #5
          make sure you tape all the seams in the plastic sheating and right before you paint hose down the floor that will keep most all of the dust down. then you have to realize that your car is dusty,(no mater how much you clean it)so tape the insides of every seam on your car.
          Getting there

          Comment

          • Farbin Kaiber
            Lil' Puppet
            • Jul 2007
            • 29502

            #6
            they even show how to use a box fan and carbon filters for home HVAC use to cut down on odor/fumes in the exhaust.(good for appt/neighbors)

            Comment

            • roundel
              Advanced Member
              • Aug 2007
              • 111

              #7
              oh and don't wear a mask. The paint job will look great no matter what.
              Getting there

              Comment

              • TwoJ's
                R3V Elite
                • Oct 2005
                • 4908

                #8
                Originally posted by roundel
                oh and don't wear a mask. The paint job will look great no matter what.
                ??

                I read the wikihow and general consensus is that if using a regular box fan and a laquer based paint or primer, you will explode in your little booth. My friend is the one who knows about paint and body stuff, so I'm not sure if the primer he picked out is combustable or not. I'll ask him.

                Comment

                • Farbin Kaiber
                  Lil' Puppet
                  • Jul 2007
                  • 29502

                  #9
                  glad to be of service.

                  Comment

                  • roundel
                    Advanced Member
                    • Aug 2007
                    • 111

                    #10
                    paint fumes will make you retarded...dont breath them
                    Getting there

                    Comment

                    • Court M3
                      R3V OG
                      • Jan 2004
                      • 6713

                      #11
                      check out this guy on s14.net he did his own paint

                      Continuous For Sale Thread
                      323i s50

                      Comment

                      • Tavern Gnome
                        R3VLimited
                        • Jul 2007
                        • 2137

                        #12
                        Just make sure you get your garage CLEAN and keep the floors wet like roundel said. A little dirty won't matter much with primer but it doesn't hurt. I'm sure your painter buddy knows all of the tricks.
                        __________________
                        1987 Toyota Landcruiser V8

                        Comment

                        • TwoJ's
                          R3V Elite
                          • Oct 2005
                          • 4908

                          #13
                          Originally posted by Court M3
                          check out this guy on s14.net he did his own paint

                          http://www.s14.net/forums/showthread.php?t=28224&page=3
                          Thanks for posting that. His car seems like it came out good, and that makes me confident. He seems like he didn't really know what he's doing, and I'm sort of in teh same boat. Although I can tell that I've spent quite a bit more time sanding before primer. I think that was wasted time, but we'll see.

                          Comment

                          • trashcop 80s 80s
                            E30 Enthusiast
                            • Jun 2004
                            • 1130

                            #14
                            I have painted my e46 bumper, a friends e36 bumpers sides and mirrors, schnitzers, trunk, all in a makeshift shed and they came out really good. I didn't use a filter, just a box fan in the window, and I didn't tape up anything. Don't be a puss, paint the whole car. It is not that difficult unless you are looking for a show car.





                            sigpic

                            Comment

                            • AndrewBird
                              The Mad Scientist
                              • Oct 2003
                              • 11892

                              #15
                              Here is another home-made setup:

                              In another thread I mentioned that I am painting my MG myself in my garage. I am fortunate to have a friend who has been painting cars professionally for 20 years to advise me (and loan me some of his equipment on occasion). First is a picture of some of my supplies and equipment.

                              Comment

                              Working...