Announcement

Collapse
No announcement yet.

front bumper wont come off

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    front bumper wont come off

    ok well i bought the PB blaster, sprayed it on yesterday and let it sit all night....
    Today i tried and take the two bolts out but they wont come out.... i was doing it forever and still nothing came out. how can I get these damn things out.

    #2
    BEERTECH

    Comment


      #3
      Get a breaker bar and put some elbow grease into it. They'll come off, trust me. They haven't been touched in 15 years.

      Comment


        #4
        Originally posted by Rob
        www.soloflex.com
        :rofl:

        Comment


          #5
          If you have to, just get a breaker bar and a hammer and go at them, they'll eventually break loose. Remember, they turn to the left looking UP, not down. I made that mistake the first time.

          "See, we're adding a little something to this month's sales contest. As you all know, first prize is a Cadillac Eldorado. Anyone wanna see second prize? Second prize is a set of steak knives. Third prize is you're fired."

          Comment


            #6
            Originally posted by 808BMW
            Originally posted by Rob
            www.soloflex.com
            :rofl:

            lmao noo its not that... i kept on turning and turning it it just wont budge.... this is what happends

            well at first it loosens up but then all of a sudden it gets tighter again then it keeps doing that, off and on

            Comment


              #7
              Originally posted by Eurospeed88
              Get a breaker bar and put some elbow grease into it. They'll come off, trust me. They haven't been touched in 15 years.
              what is a breaker bar? and those bolts mighta been worked on...she was in a little crash about 5 years ago...damn mini van mom pulled out and hit the front cornor of her car.... front bumper/fender i think.

              Comment


                #8
                are you sure you are turning them the right way? and do you have the right tool? get an impact gun and hammer down

                http://www.westwerksauto.com

                Comment


                  #9
                  Originally posted by e30evolution
                  are you sure you are turning them the right way?
                  I was thinking the same thing, when i was taking mine off today for the first time i was turning the wrong way :oops:
                  No shame
                  90 325is
                  IE stage 3s and refeshed m20....

                  Comment


                    #10
                    well it is upside down, so if you arent paying attention it is easy to do

                    http://www.westwerksauto.com

                    Comment


                      #11
                      well im using a 19mm socket

                      and im not down on the ground, i was just on my knees turning it to the left

                      Comment


                        #12
                        impact

                        http://www.westwerksauto.com

                        Comment


                          #13
                          Originally posted by Rob
                          www.soloflex.com
                          AHHAHAHAHAHAHAHA :D

                          Comment


                            #14
                            Originally posted by Schneider325
                            well im using a 19mm socket

                            and im not down on the ground, i was just on my knees turning it to the left
                            Were you pushing the bar to the left or to the right?

                            "See, we're adding a little something to this month's sales contest. As you all know, first prize is a Cadillac Eldorado. Anyone wanna see second prize? Second prize is a set of steak knives. Third prize is you're fired."

                            Comment


                              #15
                              Originally posted by e30evolution
                              impact
                              Using a tree to impact your bumper worked for me...

                              Comment

                              Working...
                              X