critique my alignment

[chrisesteschiro]

I just dropped the car with billy sports, h&r race, sways, new akg engine mounts, rtab, and subframe bushings, solid rsm's, adjustable camber castor kit for front, and aluminum m3 control arms. Here are my alignment specs....

Left front- -1.2 camber, 10 degrees caster, .09" toe, 15 degrees SAI, 13.8 included angle

Right front- -1.3 camber, 10 degrees caster, .08" toe, 15.3 degrees SAI, 13.9 included angle

.1 degree cross camber
.1 degree cross caster
.16" total toe

Left rear -3.1 camber, -.12" toe
Right rear -2.8 camber, .25 toe

Rear total toe .03"
Rear total thrust angle -.27 degrees.

I will eventually get a rear camber kit....does everything else look ok?

Thanks

[2002maniac]

I will eventually get a rear camber kit....

yeah, I would recommend that. your rear toe looks a bit funny (not terrible)

If you are going to be doing much aggressive driving I would want at least -2.5 of camber up front. I run -3.5 and tire wear is hardly affected (bad toe really chews up tires)

**EDIT** never mind your rear toe does look bad, I just realized that measurement is in inches not degrees. your car is doing the crab walk :) I'd get that taken care of.

[chrisesteschiro]

"Is rear toe of .03 inches bad? I think spec is .13 with a .25 range......"

I see what you are talking about now , what would cause that? I think one of my subframe bushings might not be seated as well as the other.