Bellingham r3vers

[h0lmes]

Something is wrong with my clutch. When I press it, it just goes all the way to the floor and doesn't return. When I try to start the car it doesn't start because the car is in gear, even with the clutch in. According to Jparkr it is a hydraulic issue. What do you guys think? Can someone come help me out Monday night? I will gladly buy anyone that helps me a case of beer or dinner.

[mtechnik]

It's the cyliner Holmes.

Happened to me once and I freaked out. It's an easy and inexpensive fix.

[Alkasquawlik]

ya master and/or slave cylinders.
it happened to me on my anniversary with my girlfriend when i was leaving my house. i had to borrow my brothers pos e28 so i could go out

[Jand3rson]

It's most likely your slave cylinder, Tom. I just had the exact same thing happen to me with my Nissan pickup. It could be the master, but it's usually the slave. However depending on how long it's been since either were replaced, I'd probably just do both. I've been told by a few people that usually when one of those goes bad, it's because the other is going as well.

[h0lmes]

It's most likely your slave cylinder, Tom. I just had the exact same thing happen to me with my Nissan pickup. It could be the master, but it's usually the slave. However depending on how long it's been since either were replaced, I'd probably just do both. I've been told by a few people that usually when one of those goes bad, it's because the other is going as well.

Yeah this is what Criv and Parker told me. Should I buy them new?

[golde30]

yes buy them new/

[Jand3rson]

Yeah this is what Criv and Parker told me. Should I buy them new?

Definitely. I've stopped buying most parts used, it's not worth it.