so about 3 weeks ago i went to fix my "shakey wheel" problem i had in my e30. and i replaced a control arm on pasenger side and ball joint because they were bad, and i replaced both tie rods and tie rod ends because it looked like both of em were about the break. STILL didnt fix the problem. checked my brake rotors and they are fine no warping. anybody have any idea of why my wheel still continues to shake under heavy braking in the 30-60 mph range and just shakes on its own a little while driving almost anywhere really?
Announcement
Collapse
No announcement yet.
shakey wheel problem =/
Collapse
X
-
yep wheels just got balanced and i also got the car aligned too rite after i put the new control arm, ball joint and tierod/end. and weird thing is rite after i got it aligned my steering wheel was actually straight, cause it wus tilted left a bit before and it didnt seem to shake, then ide say next day i went to drive it and the steering wheel looked off again like my alignment got thrown off and it shakes like crazy again, feels exactly the same as before i replaced that stuff. and i only replaced passanger side cause when u brake u can clearly feel the shake is in the passanger wheel not driver side at all
Comment
-
Always replace control arms in pairs. Also, did you replace the control arm bushings? If not, and the wheels have been properly balanced, then the bushings are most likely the problem.Eric Giles
'20 M2 CS
'04 M3
'11 X5 35D
'87 325is
'91 325i Sport
There are few things more expensive than a cheap BMW...
Comment
-
hey guys, ya my wheels have hub ecentric spcaers on them already, looks like about 15mm maybe 10mm not that big. so im thinking its gotta be wheel bearings?. just curoius, is there any way a wheel bearing can explode while driving or something and kill me, cause if so ide like to replace them immediatly but if its something that i can still drive on for awhile i have to fix my exhaust befre that.
Comment
-
Originally posted by joehasane30 View Posthey guys, ya my wheels have hub ecentric spcaers on them already, looks like about 15mm maybe 10mm not that big. so im thinking its gotta be wheel bearings?. just curoius, is there any way a wheel bearing can explode while driving or something and kill me, cause if so ide like to replace them immediatly but if its something that i can still drive on for awhile i have to fix my exhaust befre that."We praise or find fault, depending on which of the two provides more opportunity for our powers of judgement to shine."
Comment
-
Originally posted by joehasane30 View Postyep wheels just got balanced and i also got the car aligned too rite after i put the new control arm, ball joint and tierod/end. and weird thing is rite after i got it aligned my steering wheel was actually straight, cause it wus tilted left a bit before and it didnt seem to shake, then ide say next day i went to drive it and the steering wheel looked off again like my alignment got thrown off and it shakes like crazy again, feels exactly the same as before i replaced that stuff. and i only replaced passanger side cause when u brake u can clearly feel the shake is in the passanger wheel not driver side at all
<sigh>I must be just be getting old.sigpic
Comment
Comment