Traded my 2018 S3 for a 2019 Miata RF Grand Touring this week.

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • Elysian
    replied
    Originally posted by zwill23
    Ayyyye, lime creek road! Ya must be another Austin guy, that road has been freaking me out more lately. Becoming more and more common with cyclists and heavy footed enthusiasts blowing out of their lane.

    Miata is looking sweet!
    Yeah when I drove it with the Tejas Miatas club we didn't go too nuts.

    Leave a comment:


  • zwill23
    replied
    Ayyyye, lime creek road! Ya must be another Austin guy, that road has been freaking me out more lately. Becoming more and more common with cyclists and heavy footed enthusiasts blowing out of their lane.

    Miata is looking sweet!

    Leave a comment:


  • 2mAn
    replied
    Originally posted by Elysian
    No regrets ditching the S3 for this, whatsoever.
    Awesome

    Leave a comment:


  • Elysian
    replied
    Have had this for just over a month now and lots has happened. Bought the OEM LSD unit:


    Installed it:


    Got the OEM strut bar setup, installed that:


    Got a track alignment:


    Replaced the stock door bushings with 3d printed ones:


    Got a Sickspeed shift knob for it.



    Got a Fiat 124 Spider steering wheel:


    This is the original steering wheel, and it really let the rest of the experience down:


    Got a spider crack in the windshield, opened up right in front of me on my way to autocross this weekend:


    Autocrossed this weekend, it rained in the middle of my heat but I loved it.


    Car was absolutely filthy after autocross:


    Cleaned up, daily wheels/tires reinstalled:


    Here's some pics from the event:







    Absolutely love this car, it's absurdly fun any time I'm driving it. No regrets ditching the S3 for this, whatsoever.

    Leave a comment:


  • Elysian
    replied
    Originally posted by Northern
    My friend who owns one of these is 6'1 or 6'2, I'll tell him to look for those seat mounts haha.
    I'm 6'3 and when he first closed the roof it smacked me on the head, but after 10 minutes or so I sank into the seat enough that I cleared, but there's no way I could use a helmet with the roof up.
    These are the ones I saw:



    The only downside is I believe they remove the sliders, so the seat has to be installed in the correct position and then it's stuck there. The seat back can still flip forward of course.

    Leave a comment:


  • Northern
    replied
    My friend who owns one of these is 6'1 or 6'2, I'll tell him to look for those seat mounts haha.
    I'm 6'3 and when he first closed the roof it smacked me on the head, but after 10 minutes or so I sank into the seat enough that I cleared, but there's no way I could use a helmet with the roof up.

    Leave a comment:


  • Elysian
    replied
    Winding down from the first autocross event, had no idea how the car would be going in, but learned a lot. Went faster every run but I think the 4th one. Only got 5 runs unfortunately, and completely spaced turning traction control off the entire day. Still had fun, but have a lot to learn about the car. Still feel like I did okay for only having driven the car the last week and a half. The RE71R's are absolutely brilliant.

    Pic:



    The course was really frustrating, and after the event I checked how many DNF's there were, turned out there were 60 runs that didn't finish. Just bad course design, IMO.

    Here's my map of the course, tracked it using Google Fit:



    Was 0.41mi. Here's my fastest run. I lost it on the last turn, but still had some good moments. Trying to get used to driving 10 and 2.


    https://www.youtube.com/watch?v=nHQp...annel=AdamBath

    I had two instructors ride with me on my 2nd and 3rd run, got some pointers that helped me run faster. I placed 11th in Novice class, out of 45 entrants.

    Originally posted by Northern
    Even with stock tires, these cars are hilariously well planted.

    I wish they made a lighter/coupe version with another 2-3" of headroom.
    Yeah, they aren't great if you're tall. I feel like I'm about max height at 5'-9"/175cm. There is a company that makes replacement mounts for the seats that lower the seat about 1"/25.4mm, but that would still be a tight fit for someone taller than 6'/183cm.

    Leave a comment:


  • Northern
    replied
    Even with stock tires, these cars are hilariously well planted.

    I wish they made a lighter/coupe version with another 2-3" of headroom.

    Leave a comment:


  • Elysian
    replied
    Installed my dual dash cam today, though won't mount the front windshield cam till tomorrow after I get the UV film installed on the front windshield.



    Also mounted my track wheels. These are wrapped in Bridgestone RE71R's, 215/45R17.



    Love how it looks with black wheels, they really work for the color.

    Here's a quick video of some turns I took after putting the tires on. The grip on them is unreal, I wouldn't be surprised if I lift a tire before I lose traction.



    Leave a comment:


  • DEV0 E30
    replied
    Good stuff.

    Oh I know if I drive one I'd want one, I'm trying to be a little bit practical too if I spend the big monies (anything over $10k) for me.

    I'm having many a crisis on possibilities.

    Leave a comment:


  • Elysian
    replied
    This car has some interesting cupholders. They're removeable, and there are different locations in the car that they can be plugged into. They're a little flimsy, so I've resolved to not have any cups without secure lids in the car. Here's a pic of the cupholders behind the arm rest:



    And here's the one on the dash:



    There's not much of a spot to place a phone in the dash, and the one spot that is there is too shallow for my OnePlus 8T, and also gets way too hot from transmission/exhaust heat, which overheats my phone, so I 3d printed a tray that plugs into the dashboard cupholder. Pic:



    Printed on my Prusa i3 MK3S with a 0.6mm nozzle, I decided to push the machine on this print and went with 0.45mm layer heights, shaving the print time from nearly 13hrs to 10hrs. The only problem with those settings is the cracking you can see on the sides in the middle, but I like this tray enough I may go ahead and finish sand it, fill the cracks with superglue, and paint it. This piece is printed in ASA.

    Leave a comment:


  • Elysian
    replied
    Originally posted by DEV0 E30
    Very nice!

    Thinking about a daily and a new RF is a contender. It's not as practical (obviously) but I'm still split on what is next.
    If you drive one you won't be able to walk away. If you do get one, try to make sure it's got a limited slip diff. My 2019 didn't have that option, so I ordered an OEM unit, as well as the OEM strut tower bar from the GT-S package.

    Leave a comment:


  • DEV0 E30
    replied
    Very nice!

    Thinking about a daily and a new RF is a contender. It's not as practical (obviously) but I'm still split on what is next.

    Leave a comment:


  • Elysian
    replied
    Originally posted by roguetoaster
    The only thing wrong in the pictures is that the car does not have a home away from the elements, which it needs if it's a forever car.
    My E30 V8 build is taking up any home it could have.

    Leave a comment:


  • roguetoaster
    replied
    The only thing wrong in the pictures is that the car does not have a home away from the elements, which it needs if it's a forever car.

    Leave a comment:

Working...