E30s on 16s - post yours

[vitiokas95]

BBS RS 16x8.5 ET19. 10 mm spacer in front but will go with 5 mm. Tire 215/45/16

[Mr. Wolfe]

Some Toyota blue. Painted by PO.

Looks great!

BBS RS 16x8.5 ET19. 10 mm spacer in front but will go with 5 mm. Tire 215/45/16

Nice looking car and photo!

Mr. Wolfe

[aegul44]

CSL style drunk on e30. :up:

[WYZEUP]

Love your wheels Ray :) froth explosion.

Love this..........what are the specs of these wheels??? and where did you get the lips. i am building a similar set of wheels

[jxpresto]

Details^^^

Are these E32 7-series wheels?

specs pls, tires as well - Thanks

E30 M3 5-lug conversion. IE springs / Koni yellows. Wheels are 16x8 style 5s, tires are 225/50/16 dunlop direzza ZIIs.

Had to remove the anti rattle clips from the calipers to clear the wheels and a light fender roll to clear the tires. I get a little rub full lock but not enough that I can't get in and out of parking spaces, etc.

Overall extremely happy with the results and the tire selection for this size is much better than I had before when I was running 17x8 ASA AR1s with 215/45/17s. Rides a lot better with the extra sidewall as well.

[nighthawk]

Avid.1 AV.11 Wheels.
16x8 ET15.
205/45/R16 Kumho Ecsta AST Tires.

Bilstein Sport Shocks/ H&R Sport Springs.
E90 Top Hats.

[Shu]

Another E30 on Style 5's:



- Filled and drilled Style 5's
- 10mm spacer up front, 5mm in the rear
- 205/50-16 BFG Sport Comp-2
- Bilstein Sports
- H&R Race
- E90 drophats
- SPC camber plates
- New control arms and tie rods
- All springs pads retained

[Iannfld]

Ronal LS 16x7.5 with 225/45/16 Toyo R888 with E30 M3 5 lug and H&R sport.

[dishwab]

Ronal LS 16x7.5 with 225/45/16 Toyo R888 with E30 M3 5 lug and H&R sport.

Awesome. I wish they made those 4x100

[Ravosa]

16x8 et 20, what's the best tire size to run? Will I need adapters/rolling/pulling? 91 318i

[Ravosa]

Avid.1 AV.11 Wheels.
16x8 ET15.
205/45/R16 Kumho Ecsta AST Tires.

Bilstein Sport Shocks/ H&R Sport Springs.
E90 Top Hats.

Love it. Did you need spacers/rolling?

[victor_300]

My 325i on BBS RF014 (8x16 et0 and 9x16 et4)

[Mr. Wolfe]

My 325i on BBS RF014 (8x16 et0 and 9x16 et4)

;D More pics please!

Mr. Wolfe

[nighthawk]

Love it. Did you need spacers/rolling?

Thank you.
No spacers required.
This is why I got ET15 offset for these wheels, so that I wouldn't have to use spacers and still get that flush look.


Fender Rolling:
The fronts are no problem/ no rolling required.

The rears:
I first used 205/50s and rolled my fenders completely.
With a full loaded car (4 passengers + loaded trunk) it did still rub a bit on bumps. It's didn't rub on the fender lip itself, but about 2 inches higher.

I now have 205/45s and it has not rubbed at all.
I would recommend these.

[sgtskid]

[QUOTE=350iowner;4582487]

Hwy 129?