of the season, coming up on Friday. Added a bunch of random stuff to my M50TU swap car.
- RD chip
- Oil pressure & oil temp gauges
- Recaro SPD Driver & SRD Passenger
- Sound deadening removed
- Spal 14" Pusher through stock AC wiring w/ 80/88deg rad switch
- Brake Backing plates w/ BW brake ducts (brake ducts not installed yet)
- BW Shim Kit w/ .250 total shims added (will be adding camber plates later)
- Borbet 17x8 type E et41 shod w/ 235/40-17 Bridgestone RE01R tires
- Hawk HP+ Pads all around (might switch to HT10s in the rear to compensate for the E36 M3/ 318ti bias or add an adjustable valve)
- BW Silicone Intake Boot
- newly rebuilt diffsonline 3.46LSD w/ 40% lockup
- Single 2.5" exhaust from headers back using Borla XR-1 Muffler in the middle & Vibrant in the rear (no cats)
- Power steering delete
- is front lip w/ ryan g splitter
With just the exhaust and 3.46LSD the car is completely transformed and actually feels somewhat responsive than with the 3.07LSD and modded 325i midsection. I have S50 cams and a VSR Bolt in Roll cage that needs fixin' that I may install in the next few months, but so far I'm just enjoying the car as is. And yes I know the front needs to come down a bit. ;)





- Ben
- RD chip
- Oil pressure & oil temp gauges
- Recaro SPD Driver & SRD Passenger
- Sound deadening removed
- Spal 14" Pusher through stock AC wiring w/ 80/88deg rad switch
- Brake Backing plates w/ BW brake ducts (brake ducts not installed yet)
- BW Shim Kit w/ .250 total shims added (will be adding camber plates later)
- Borbet 17x8 type E et41 shod w/ 235/40-17 Bridgestone RE01R tires
- Hawk HP+ Pads all around (might switch to HT10s in the rear to compensate for the E36 M3/ 318ti bias or add an adjustable valve)
- BW Silicone Intake Boot
- newly rebuilt diffsonline 3.46LSD w/ 40% lockup
- Single 2.5" exhaust from headers back using Borla XR-1 Muffler in the middle & Vibrant in the rear (no cats)
- Power steering delete
- is front lip w/ ryan g splitter
With just the exhaust and 3.46LSD the car is completely transformed and actually feels somewhat responsive than with the 3.07LSD and modded 325i midsection. I have S50 cams and a VSR Bolt in Roll cage that needs fixin' that I may install in the next few months, but so far I'm just enjoying the car as is. And yes I know the front needs to come down a bit. ;)





- Ben
Comment