4 door love 320i mtech 1

[Iain]

Wanna buy an M52 for it? :D

[Motorsports]

I like

[payney8]

van ill get you some asap. Also will post some pictures of interior/ engine. Just a question the previous owner replaced the obc with some kind of cd player changer. Can you remove the obc without removing the harness? going to have a look tomorrow and see if the harness is still there. and pork hunt whats the price ;)

[payney8]

Interior shots :








got no idea what this is for?


shots for van:


bit of rust to get rid off underneath the lh side window

engine :

[Iain]

$600. It is stripped to a bare block and needs assembly

[payney8]

serious? any pictures? details? m52b28? also bit of an update just did a major service and a wash and reset my service indicator always scared about doing dodgy shit of the net but this is something that pulled through and worked. going to do a timing belt swap soon running mobil 2000 super 15w40 semi synthentic. Also ordered 19lb bosch type 2 injectors and a 255lpg walbro is also on its way

[JamesE30]

serious? any pictures? details? m52b28? also bit of an update just did a major service and a wash and reset my service indicator always scared about doing dodgy shit of the net but this is something that pulled through and worked. going to do a timing belt swap soon running mobil 2000 super 15w40 semi synthentic. Also ordered 19lb bosch type 2 injectors and a 255lpg walbro is also on its way

oh snap did you follow a write up to reset the service indicator? Got a link by chance? Nice car btw, A freshen up of the paint and a MT1 rear wing would be nice :up:

[antil33t]

Just make sure the engines are from the same aged cars to make it easier.

WAAAIT a minute... your sun visors aren't original LOL

That's a heap of jap stuff, I never got that much with my Ex-Jap car.

not being a dick, but it's probably not worth putting any money into that M20B20... you gain so much more from an M20B25.

Nice car man, do like tech1 4 doors.

[Chabs]

like those wheels

[payney8]

hahah yeah mate i noticed the sun visors arent original but they both have mirrors so thinking for re-conning them. And yeah i know that mate im not throwing much into it just enough to keep it reliable till i sort out my 13b conversion or m20b28 stroker im undecided which way to go yet cause both will be serious bills in australia

[Kershaw]

man that's beautiful. i'd really like to get a tech1 4 door someday and put a m30 in it.

mini m5. :)

[payney8]

hahaha plan is either a m20b28 or 13b peripheral ported. Plus ive got a supercharger lying around once the busted ass m20b20 is manualized while im sorting out suspension/brakes and its easy to reset the indicator on the new style plug its bottom pin under the pacman which is facing to the right then the furtherest pin directly to the right of its mouth jump them then ignition on for a few seconds then off all done

[DTM190]

Nice one, I not long got a Jap E30 4 door D/S 320i auto and did the M20B25 and 5 speed swap from an aussie car and against what I was told, didnt need to change harness.

I had to double take seeing the rear with late tails and Mtech1.

I would be going M20B25 swap as the cheaper option or get Iains motor if you want more power, will cost you alot less than doing M20B28 in Aus IMO

[payney8]

hey bit off an update just fitted the walbro its a piece of piss. Literally only took me half an hour. found a bit off rust on the lh side underneath the window cut it out and fixed it up. Completed a valve set and waiting on my new injectors. Fitted a new bonnet strut cause the old one was flogged out. And put in a kenwood hu for some beats to listen to. also i found a cheap mr2 turbo looking at supercharging the b20 as like what was done it switzerland by a member off this board. Probably going maf and a war chip to sort out the tune and will only be running about 7psi of boost to start with

[payney8]

some more pictures
check panel dramas: lights for brake light and low beam keep coming on.
cleaned it all up on put dielectric grease on it all still has problems




fixed up the loose aircon vents as per the diy on these boards


rust cutting







painted grill
\
need to get some pictures of the finished rust clean up