After seeing your car I want to swap a m30 in to a e30 for my next project.
Announcement
Collapse
No announcement yet.
4 years later
Collapse
X
-
Projects Hartge,Alpina & AC Schnitzer Builds.http://www.r3vlimited.com/board/showthread.php?t=280601
http://www.r3vlimited.com/board/showthread.php?t=227993
http://www.r3vlimited.com/board/showthread.php?t=289362
DSC04926 by Raul Salinas, on FlickrDSC03413 by Raul Salinas, on Flickr
-
Wh33lhop - thanks dude. In the next week or two.Mtech1 v8 build thread - https://www.r3vlimited.com/board/sho...d.php?t=413205
OEM v8 manual chip or dme - https://www.r3vlimited.com/board/sho....php?p=4938827
Comment
-
Shadowline the bumpers or ban
SILBER COMBAT UNIT DELTA (M-Technic Marshal)
RTFM:http://www.r3vlimited.com/board/showthread.php?t=56950
Comment
-
Well, we'll see how newly re-valved bilstein sports will work once they arrive. Bilstein is shipping them out today. I am having GC modify my 51mm strut housings and they'll add e30m3 sway bar mounting points / reinforce the bottom part of the strut housing.
I gave Bilstein the weight of the car at each corner, the spring rates and also motion ratio although I don't know if they needed the latter. They have also modified the internal bump stops but I won't know about all the details until they arrive.
I recently upgraded to the cabrio front bar, from the stock early 318bar with new bushings/etc. Will the stock e30m3 front sway bar links work or do I need something else for it to work with the cabrio bar?
Picking up new gc plates and rsms next :)Mtech1 v8 build thread - https://www.r3vlimited.com/board/sho...d.php?t=413205
OEM v8 manual chip or dme - https://www.r3vlimited.com/board/sho....php?p=4938827
Comment
-
Another car done right, good work Jean!Need parts now? Need them cheap? steve@blunttech.com
Chief Sales Officer, Midwest Division—Blunt Tech Industries
www.gutenparts.com
One stop shopping for NEW, USED and EURO PARTS!
Comment
-
Do you have center caps for the Hartge rims? Some people prefer them without - I like them with. I bought a set through Turner Motorsport about six months ago (who is now the Hartge rep in the US). Expensive ($200) but I thought worth it. Most people say they are NLA, but Hartge DE had them at that point.
Comment
-
I do have 4 new caps, but one of the one won't stay on the wheel. I am looking for another wheel so for now i'll just run them cap-less.Mtech1 v8 build thread - https://www.r3vlimited.com/board/sho...d.php?t=413205
OEM v8 manual chip or dme - https://www.r3vlimited.com/board/sho....php?p=4938827
Comment
Comment