Bay Area E30S52: No More Slush Box + More Horsepower

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • bernzpeed
    replied
    Finally had some energy to do the projects. Still procrastinating on the dash swap.

    Leave a comment:


  • freeride53
    replied
    So much progress lately!

    Leave a comment:


  • bernzpeed
    replied
    Also tried this one since the wheel was off

    Leave a comment:


  • bernzpeed
    replied
    Also this was laying around for the past 2 years so I figured I would put it to good use.



    My trunk is fully lit. Yeay!
    Last edited by bernzpeed; 10-05-2011, 09:12 PM.

    Leave a comment:


  • bernzpeed
    replied
    IS Side Skirt Installation

    Parts you need:

    51 71 1 947 059 Cover left (fender)
    51 71 1 947 060 Cover right

    51 71 1 947 063 Cover left (body)
    51 71 1 947 064 Cover right

    51 71 1 933 719 Clamping bolt
    NOTE: You have to remove the bolt at the bottom of the fender and replace it with a similar but longer screw bolt instead of using this.
    Trust me it will work better.

    51 71 1 927 439 Plug (You need 2)
    51 71 1 938 940 Clamping (You need 10)
    51 71 1 932 996 Grommets (you need 12)
    51 11 1 942 789 Rivet (you need 4)
    51 71 1 959 929 Clamps (You need 12)

    My car before install


    Brand spanking new




    Figuring out where to fit all clips






    Test fitting the whole thing.
    NOTE: Make sure you the both pieces TOGETHER.


    Otherwise, you will get this gap


    Marking the tip of the clips so it transfers to the body.




    Drilled out a hole with a 3/8 step drill


    Inserted the grommet


    Tap tap tap


    Tadah!


    Installed the bottom clips






    Lined up right


    Making a hole for the rivet


    Lined up perfectly the second time around


    My riveter is too small for the BMW rivet


    Temporary fix
    Last edited by bernzpeed; 10-05-2011, 09:05 PM.

    Leave a comment:


  • bernzpeed
    replied
    you can... hinge in the bottom. actuator on top to tip it over and motor that winds up to pull it back.

    Leave a comment:


  • dmoney(AB)
    replied
    damn, if only I could do that for the rear :p

    Leave a comment:


  • bernzpeed
    replied
    thanks!

    Leave a comment:


  • !AjHoWzA!
    replied
    Looks great bro! Love the color white on E30's

    Leave a comment:


  • bernzpeed
    replied
    extra set available.... pm me.

    Leave a comment:


  • mcr_driver
    replied
    win...simply much win...how much was that project?

    Leave a comment:


  • bernzpeed
    replied
    My name is Bong, Jane Bong....lol.
    Last edited by bernzpeed; 08-07-2011, 10:20 AM.

    Leave a comment:


  • Simon S
    replied
    Most excellent.

    Leave a comment:


  • b15azn
    replied
    ahhaha first time see that license thing on an E30. Awesome!!!

    Leave a comment:


  • blksuperman2
    replied
    That's awesome. Who are you, James Bond? lol

    Leave a comment:

Working...