GC Coilovers and Rear End Refresh :)

[iwantspeed]

I have the marshall subframe too, installed it in may of this year and took it for an alignment, i was at -3.5 left and 3.73 right camber, and the toe was way off +1.1 left and -0.54 right. After alignment the camber was at -2.07 left and -2.09 right (factory spec is -2.0), toe was correted to +0.20 left and +0.11 right (factory spec is +0.19). I was gappy with the results. One thing though, the left (driver side) toe nut was a bitch and gave the guy a very hard time to deal with it as it was very hidden. Did you run into the same problem?

Can any regular aligment place take care of aligning the rear end?
And can you post a link to the Marshall subframe.
Thanks.

[trackjunkie21]

Props for having a man sized tire on their! What are the wheel/tire specs?

[KamakaziX]

Props for having a man sized tire on their! What are the wheel/tire specs?

This.

[coreyw]

Can any regular aligment place take care of aligning the rear end?
And can you post a link to the Marshall subframe.
Thanks.

I took it to a local Tire Factory and the guy there did it no problem. It took about an hour and a half, and was like $85. A local bmw specialist shop though said it'd take 3 hours and they wanted $280 for it!
Here's one of Marshall's threads: http://www.r3vlimited.com/board/showthread.php?t=190249

Props for having a man sized tire on their! What are the wheel/tire specs?

Thanks! Wheels are 16x7.5/front and 16x9/rear with 225/45/16 all around.

[e30_neverstock]

nice coreyw, that just made the stance look 100 times better.:o

:up::up:

[88Alpine]

Still too high. An inch lower would be golden.

[FlodaM3]

This car...I like everything about it.

What this guy said.

[Jean]

Still too high. An inch lower would be golden.

Lol. Sometimes it's not all about how low the car looks.

[KamakaziX]

Lol. Sometimes it's not all about how low the car looks.

:ohsnap:

[Mlarsen]

You sir, are doing it right.

[88Alpine]

Lol. Sometimes it's not all about how low the car looks.

Whatever floats your boat, lmao.

[trackjunkie21]

I took it to a local Tire Factory and the guy there did it no problem. It took about an hour and a half, and was like $85. A local bmw specialist shop though said it'd take 3 hours and they wanted $280 for it!
Here's one of Marshall's threads: http://www.r3vlimited.com/board/showthread.php?t=190249


Thanks! Wheels are 16x7.5/front and 16x9/rear with 225/45/16 all around.

Any rolling in the rear/front? I need a decent set of tires but I'm not a fan of stretch.

[csermonet47]

Looks great! Love the old school cali plate.

[Jean]

Whatever floats your boat, lmao.

Obviously OP isn't doing this for LOOKS, if you want to SLAM your car to the ground make your own thread on it.

[HR2L]

Looks great! Love the old school cali plate.

This! Mad jealous, wish my e30 still had its OG plates. Oh and the GC Coils wouldn't be bad either. :)