Slammin's e36 M3.....

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • slammin.e28
    שמע ישראל
    • May 2010
    • 12054

    #1

    Slammin's e36 M3.....

    Friend of mine let me get a staggered set of 66s. ET20 with 225 up front, and 255 out back. Rubs like a mother in the rear, but looks and feels oh so right. Even got a fresh inspection sticker after driving with bald tires for 6 months.





    Last edited by slammin.e28; 01-23-2013, 11:04 AM.
    1974.5 Jensen Healey : 2003 330i/5
  • evandael
    R3VLimited
    • Oct 2009
    • 2881

    #2
    oh that does look nice.

    Comment

    • Rustyduktape
      E30 Addict
      • Jul 2008
      • 592

      #3
      Look's great!
      1987 325is Black/Black
      -91k
      -Stock (mostly)

      Comment

      • LJ851
        R3V OG
        • Nov 2010
        • 7918

        #4
        Originally posted by slammin.e28guy
        Friend of mine let me get a staggered set of 66s. ET20 with 235 up front, and 255 out back. Rubs like a mother in the rear, but looks and feels oh so right. Even got a fresh inspection sticker after driving with bald tires for 6 months.




        Oh my! That looks very nice.

        That slaps at least 50% of the homo off the E36's face.
        Lorin


        Originally posted by slammin.e28
        The M30 is God's engine.

        Comment

        • slammin.e28
          שמע ישראל
          • May 2010
          • 12054

          #5
          Here's a "before" pic:



          Really hated those wheels.
          1974.5 Jensen Healey : 2003 330i/5

          Comment

          • F34R
            sLaughter
            • May 2009
            • 12385

            #6
            I like the before pictures alot!(CSL knock off band name?) those 66s need a smaller sidewall to fit a bit better. Looks great.

            Are you using hub rings? the e39 uses a 74.1mm hub vs the 72.5 standard hub. I am shocked there is no money shot of the ass! Need to see those 9s from the back ;)

            FYI the setup is 17x8/9 et20 and 26(9s).
            Last edited by F34R; 01-23-2013, 11:04 AM.
            ~ Puch Cafe. ~ Do business? feedback ~ Check out my leather company ~

            Instagram: @BWeissLeather

            Current cars:
            ~ '87 325 M30B35 swap
            ~ '87 535
            ~ 01 540 Msport 6spd
            ~ '06 X5 4.8is

            Comment

            • nrubenstein
              No R3VLimiter
              • Feb 2009
              • 3148

              #7
              It looks less like ass than expected, but it's not a good look.
              2006 GMC Sierra 2500HD 4WD LBZ/Allison
              2002 BMW M3 Alpinweiß/Black
              1999 323i GTS2 Alpinweiß
              1995 M3 Dakargelb/Black
              - S50B32/S6S420G/3.91
              1990 325is Brilliantrot/Tan
              1989 M3 Alpinweiß/Black

              Hers: 1996 Porsche 911 Turbo Black/Black
              Hers: 1988 325iX Coupe Diamantschwartz/Black 5spd

              sigpic

              Comment

              • slammin.e28
                שמע ישראל
                • May 2010
                • 12054

                #8
                Originally posted by F34R
                I like the before pictures alot!(CSL knock off band name?) those 66s need a smaller sidewall to fit a bit better. Looks great.

                Are you using hub rings? the e39 uses a 74.1mm hub vs the 72.5 standard hub. I am shocked there is no money shot of the ass! Need to see those 9s from the back ;)

                FYI the setup is 17x8/9 et20 and 26(9s).
                I have no idea who made the CSLs. I ran them on my e46 for a while and liked them on there, but I hate buying tires for them. I'll give them another looksy and see if I can find anything on them.

                Tires are used to get me through my slump of bad car luck. Once I get back on my feet I'm going to get some new rubber.

                Yes yes to the hub rings. I'll have to get a better $$ shot when I get a chance to run outside.

                I never really looked at the specs for the wheels, lol. I'm not a big wheel/tire fitment guy, but these turned out perfect IMO.

                Originally posted by nrubenstein
                It looks less like ass than expected, but it's not a good look.
                :p
                1974.5 Jensen Healey : 2003 330i/5

                Comment

                • e30shmobberr
                  E30 Mastermind
                  • Mar 2010
                  • 1934

                  #9
                  i dig.

                  Patrick - IG:niicknac
                  RIP 1987 BMW 325is - S50'd ZF 6-speed, flared, bagged

                  Comment

                  • MattTHEe30GURU
                    Grease Monkey
                    • Jun 2012
                    • 388

                    #10
                    looks damn good imo!
                    Originally posted by fronton
                    He must have been staring right the pole, all the way into it. Happens to me playing mariokart every time.
                    sigpic
                    1982 F250 Built 351W-sold
                    1994 325i-sold
                    1987 325es-sold
                    1991 318i Slicktop- work in progress

                    Comment

                    • ZinnoBerrotEta
                      Wrencher
                      • Dec 2010
                      • 240

                      #11
                      The fitment out back looks tighter than a young girls tuna.

                      I think it looks great. I've always had a thing for the E36 M3.
                      I thought you were selling this thing, no?

                      Comment

                      • Blackout
                        R3V Elite
                        • Apr 2011
                        • 4125

                        #12
                        Meh.
                        » PARTS FOR SALE
                        » TRANSACTION FEEDBACK

                        Comment

                        • series88
                          E30 Fanatic
                          • Nov 2011
                          • 1231

                          #13
                          That looks smashin slammin:up::up::up:

                          Comment

                          • DOOM
                            Noobie
                            • Jan 2011
                            • 2

                            #14
                            nice!!

                            Comment

                            • Dj Buttchug
                              R3V OG
                              • Jun 2010
                              • 7633

                              #15
                              the definition of prime fitment. Roll rears and be done.

                              Slammin wins, again :up:

                              Turbo M42 Build Thread :Here
                              Ig:ryno_pzk
                              I like the tuna here.
                              Originally posted by lambo
                              Buttchug. The official poster child of r3v.

                              Comment

                              Working...