Announcement
Collapse
No announcement yet.
MPLFoster - 1990 325i - Exporting back to Germany
Collapse
X
-
Straighten out that valence with your new lip! Looks great otherwise. Can't wait to see those wheels and some suspension on.
Leave a comment:
-
Euro Grilles, Smoked Smileys, Smoked Signals and an iS lip.
35w 4.3k Morimoto H1 HID kit.
Leave a comment:
-
Do you not trust adapters/spacers or something?
I really enjoy the look of these wheels. They're for show, not for go. I have plans for a track wheel set-up as well. So i won't be too aggressive with this set. And i'm getting top quality adapters...no eBay specials here.
The PO assured me that the T-belt was done at 104k miles. Now at 108,xxx miles. But you are right, since i can't confirm it 100% i'll put it on the ASAP to-do list. Also, thanks for the claybar advice. When i get some time i'll detail her once more and put the claybar to use. Good to know Alpineweiss responds well to TLC. :up:
Leave a comment:
-
I suggest you sell those wheels and find something 4x100, also recommend timing belt first unless you know and can prove when it was last done, try a clay bar on your paint, they work best on alpine
Leave a comment:
-
Custom adapters for these Epsilons are being made and shipped out next week...can't fucking wait.
Washed her and mocked them up. Looks good. Just need to sort out some suspension and i'll be happy... for a bit..
Im thinking about B'sports and H&R Race with drop-hats. Or MeganRacing full coil-overs for adjustability. Dunno yet.
Leave a comment:
-
Originally posted by Pootis View Posthttp://www.motorsport-tech.com/wheel_adapters_pop.html
These are what most guys are running adapter wise. They can do custom sizes and everything else looks like they would run you $240 thats not bad
Awesome.
Looks like what i need will have to be custom ordered since i didn't find any listing on their site for 4x100-4x114 adapters..I'll contact them and see what's available.
Thanks for the link!
Leave a comment:
-
http://www.motorsport-tech.com/wheel_adapters_pop.html
These are what most guys are running adapter wise. They can do custom sizes and everything else looks like they would run you $240 thats not bad
Leave a comment:
-
Washed, buffed and waxed my car. Still kinda dull but a damn sight better than before. Still need to detail the engine bay and interior...
Needs lip bad
Need to straighten out the lower valence out as well..
Leave a comment:
-
Ima slut for good lights. Bought these with the intention of retrofitting a proper full-size projector and running D2S HIDs for max output. That won't be till later. I'll run halogens for the time being...
Leave a comment:
-
Originally posted by Conki View PostI grabbed this at a Pick-N-Pull, and was told it's a Pfeba fake.
Yours look similar, could be an orig. Pfeba maybe?
Nice find btw, and great price!
EDIT: Now that I looked at the Hartge spoiler, that looks more like it. Nice score!
After some research last night i found that Hartge stamps the underside of the spoiler with their logo...
duuuhhhh...i feel dumb for not inspecting it more thoroughly. Shitty pic but you can still see it says Hartge...
So yes, it is confirmed, i have an authentic Hartge rear spoiler.
Originally posted by pilotskillse30 View Postgood start looking forward to the build
Leave a comment:
-
Originally posted by 325islandhopper View Posthttp://phatputer.orconhosting.net.nz/bmwoct2.jpg
^^^
Image of a Hartge Spoiler
^^^
Image of a Zender Spoiler
My spoiler does NOT have center supports. It mounts to the trunk lid on either side. So im pretty sure it's Hartge. Someone know any better?
Yours look similar, could be an orig. Pfeba maybe?
Nice find btw, and great price!
EDIT: Now that I looked at the Hartge spoiler, that looks more like it. Nice score!
Leave a comment:
-
Anyone know of a high-quality, off-the-shelf adapter to go from 4x100 to 4x114.3? All i can find so far are cheap eBay specials. I prefer top quality name brands so i won't have to worry about balancing issues or stress loads. I take long trips often and i won't stand for any wheel shimmy or out-of-balance issues. No thicker than 1" preferred.
If no off-the-shelf options are available, then are there custom options out there? If so, who makes them?
Thanks for any assistance.
These are the wheels i'd like to make work on my car...
Epsilon Southern Ways Mesh
Leave a comment:
Leave a comment: