Buffalonians might recognize the car, but here it is:
@ Auto-X
It is a 1991 318is. Mod list:
Engine + Driveline:
-43mm turbo
-ARP Head studs
-Z4 3.0 SSK
-UUC delrin shift bushings
-Magnaflow 11365
-Blank rotors (front) ATE Powerslot rotors (rear) + Hawk HPS Street pads
Suspension:
-BC Racing Coilovers (skid plate in the works)
-E30 M3 offset CABs
-E36 M3 steering rack
Interior:
-AC Schnitzer aluminum pedals, shift knob, e-brake handle(or stock stuff + ZHP knob, depending on how baller I feel)
-Summit Racing Seats
-Momo Competition 350mm wheel
-SnapOff Quick Release
Exterior:
-Smoked turn signals and side markers
-US ellipsoid conversion
-HIDs
-Euro grills
-Custom black wheel well trim (haven't put the fronts back on yet)
-Deleted model numbers
-Replaced busted ass chrome antenna with a working black one
-XXR 002 16x8 flat gunmetal rims, haters gon' hate
-205/45 tires
-Mtech1 rear spoiler
The car is currently put away for the winter. It has an oil leak from the profile gasket which I will be repairing. The engine will be removed and rebuilt, and I will be doing some additional engine work while I'm in there and throw a turbocharger on it. It will be a slow build process as I have limited time. Really hoping to finish by the end of winter though. Powah goal is 250hp.
@ Auto-X
It is a 1991 318is. Mod list:
Engine + Driveline:
-43mm turbo
-ARP Head studs
-Z4 3.0 SSK
-UUC delrin shift bushings
-Magnaflow 11365
-Blank rotors (front) ATE Powerslot rotors (rear) + Hawk HPS Street pads
Suspension:
-BC Racing Coilovers (skid plate in the works)
-E30 M3 offset CABs
-E36 M3 steering rack
Interior:
-AC Schnitzer aluminum pedals, shift knob, e-brake handle(or stock stuff + ZHP knob, depending on how baller I feel)
-Summit Racing Seats
-Momo Competition 350mm wheel
-SnapOff Quick Release
Exterior:
-Smoked turn signals and side markers
-US ellipsoid conversion
-HIDs
-Euro grills
-Custom black wheel well trim (haven't put the fronts back on yet)
-Deleted model numbers
-Replaced busted ass chrome antenna with a working black one
-XXR 002 16x8 flat gunmetal rims, haters gon' hate
-205/45 tires
-Mtech1 rear spoiler
The car is currently put away for the winter. It has an oil leak from the profile gasket which I will be repairing. The engine will be removed and rebuilt, and I will be doing some additional engine work while I'm in there and throw a turbocharger on it. It will be a slow build process as I have limited time. Really hoping to finish by the end of winter though. Powah goal is 250hp.
Comment