Just finished the zf 6 speed swap. Thought id whore her out.

^Thank again for the shot Cabriolet!





Exterior/lighting
-Late model valence swap (front)
-Late model bumper swap
-Late model fog lights
-Startec smoked euro taillights
-New tail light gaskets
-Euro grills
-Depo euro smiley headlights
-Depo smoked turn signals
-DDM 8000k HID headlight bulbs
-DDM 3000k HID fog light bulbs
Interior:
-Autopower street roll bar
-Recaro profi xl driver seat
-Massive brake’s stock seat slider adapter for race seat
-Euro gauge cluster
-Silver gauge cluster rings
-Euro German check panel
-UK e30 passenger sun visor
-Black driver and passenger door cards
-Upgraded stereo deck
-AC Schnitzer engraved black pedals
-6 speed zhp weighted shift knob
-///M stipe shift boot
-E36 window switches
-LED cockpit lighting
Suspension/steering:
-Ground control coil over conversion kit (5” F450 4” R750)
-VAC Motorsport’s special valve Koni single adjustable shocks and shortened front strut inserts
-TC Klein rear HD shock mounts
-Camber plates
-Custom shortened strut housings
-Bimmerworld control arm brackets
-Weld on rear sway bar tab reinforcements
-New rear sub frame bushings
-New control arms
-New tie rods
-New front sway bar links
-Rear shock tower reinforcements
Brakes:
-Rx-7 4 piston calipers
-Rx-7 caliper brackets
-New rx-7 rotors (machined for e30 hub)
-New pads (aggressive)
Drivetrain:
-1995 M3 s50 engine
-413 red DME
-ARP head bolts
-.080 MLS head gasket
-Rebuilt VANOS
-Freshened head
-New intake (all), oil (all), exhaust, valve cover gaskets
-Cleaned pistons
-E34 m50 oil pan
-New e34 m50 oil pick-up tube
-New oil pump
-New water pump
-New thermostat
-New belts
-New e36 M3 radiator
-New radiator hoses
-New late model e30 coolant reservoir
-New e28 m5 engine mounts
-New crank position sensor
-New coolant temp sensor
-New coolant level sensor
-New 82-degree fan switch
-2005 z4 zf 6-speed
-Z4 flywheel
-Z4 clutch
-Derlin shift carrier bushings
-Custom shift linkage
-Custom transmission brace
-Custom shift carrier
-Custom solid transmission mounts
-Redline tranny fluid
-New e36 M3 guibo
-E36 m3 auto drive shaft
-New e30 drive shaft center support bearing
-3.25LSD differential
-E21 320i brake booster
-Custom c101 to x20 harness
-New e30 clutch master cylinder
-New e36 M3 zf clutch slave cylinder
-New clutch line
-New throttle cable and bushings
-E36 M3 OBD2 headers (heat wrapped)
-E36 M3 OBD1 mid-pipe (cats)
-UUC Corsa cat-back exhaust
-Air intake
-New starter
-New battery
-E30 M3 harness covers
-New dme relay
-Custom OEM electric fan
-Skidplate
Wheels/tires:
-Jnc ccw reps (temporary) 16x9 et10 squared
-205/45-16 (need to change rears from 225/50-16 to 205/45-16)
-5mm spacer front (to clear bbk)
To go on (I have all these):
-24lbs injectors
-3.5 euro maf
-Rear toe adjustment
-Rear camber adjustment
-MOMO steering hub adapter
-E30 M3 sway bar tabs
^Thank again for the shot Cabriolet!

Exterior/lighting
-Late model valence swap (front)
-Late model bumper swap
-Late model fog lights
-Startec smoked euro taillights
-New tail light gaskets
-Euro grills
-Depo euro smiley headlights
-Depo smoked turn signals
-DDM 8000k HID headlight bulbs
-DDM 3000k HID fog light bulbs
Interior:
-Autopower street roll bar
-Recaro profi xl driver seat
-Massive brake’s stock seat slider adapter for race seat
-Euro gauge cluster
-Silver gauge cluster rings
-Euro German check panel
-UK e30 passenger sun visor
-Black driver and passenger door cards
-Upgraded stereo deck
-AC Schnitzer engraved black pedals
-6 speed zhp weighted shift knob
-///M stipe shift boot
-E36 window switches
-LED cockpit lighting
Suspension/steering:
-Ground control coil over conversion kit (5” F450 4” R750)
-VAC Motorsport’s special valve Koni single adjustable shocks and shortened front strut inserts
-TC Klein rear HD shock mounts
-Camber plates
-Custom shortened strut housings
-Bimmerworld control arm brackets
-Weld on rear sway bar tab reinforcements
-New rear sub frame bushings
-New control arms
-New tie rods
-New front sway bar links
-Rear shock tower reinforcements
Brakes:
-Rx-7 4 piston calipers
-Rx-7 caliper brackets
-New rx-7 rotors (machined for e30 hub)
-New pads (aggressive)
Drivetrain:
-1995 M3 s50 engine
-413 red DME
-ARP head bolts
-.080 MLS head gasket
-Rebuilt VANOS
-Freshened head
-New intake (all), oil (all), exhaust, valve cover gaskets
-Cleaned pistons
-E34 m50 oil pan
-New e34 m50 oil pick-up tube
-New oil pump
-New water pump
-New thermostat
-New belts
-New e36 M3 radiator
-New radiator hoses
-New late model e30 coolant reservoir
-New e28 m5 engine mounts
-New crank position sensor
-New coolant temp sensor
-New coolant level sensor
-New 82-degree fan switch
-2005 z4 zf 6-speed
-Z4 flywheel
-Z4 clutch
-Derlin shift carrier bushings
-Custom shift linkage
-Custom transmission brace
-Custom shift carrier
-Custom solid transmission mounts
-Redline tranny fluid
-New e36 M3 guibo
-E36 m3 auto drive shaft
-New e30 drive shaft center support bearing
-3.25LSD differential
-E21 320i brake booster
-Custom c101 to x20 harness
-New e30 clutch master cylinder
-New e36 M3 zf clutch slave cylinder
-New clutch line
-New throttle cable and bushings
-E36 M3 OBD2 headers (heat wrapped)
-E36 M3 OBD1 mid-pipe (cats)
-UUC Corsa cat-back exhaust
-Air intake
-New starter
-New battery
-E30 M3 harness covers
-New dme relay
-Custom OEM electric fan
-Skidplate
Wheels/tires:
-Jnc ccw reps (temporary) 16x9 et10 squared
-205/45-16 (need to change rears from 225/50-16 to 205/45-16)
-5mm spacer front (to clear bbk)
To go on (I have all these):
-24lbs injectors
-3.5 euro maf
-Rear toe adjustment
-Rear camber adjustment
-MOMO steering hub adapter
-E30 M3 sway bar tabs
Comment