R1dd1ck913's 91 318is M50tu swap

[RedReplicant]

Very cool :)

[2mAn]

This will be a fun swap. As for using the G240, do some searching in the M50 24v subforum. I know it can be used, I cant remember which parts you'll need. I know you will need a different trans brace, I just bought the one from GunMetalGrey. I used the G260 and the only thing I had to change was the m20b23 throwbout bearing IIRC. Keep it up!

[R1dd1ck913]

I have been talking to the member Nick S. Since his swap is the same as mine almost. As far as I know right now a different tranny cross member is not needed since the mounting spot is sloted. I do however need to change or modify my shifter. I'm still not sure witch ones I can use.

[R1dd1ck913]

Ok well I have not been updating this as much as I should. I went to the junk yard today and got a set of e36 engine mounts since my motor came from a e34. I also picked up about 12 e36 switch bezels and 2 blue bottomed e36 switches. Also while there I found a replacement dome light and a rear defrost switch. I also have a question since I'm swapping a 6 cyc motor in to a 4 cyc car do I need to pick up the chip for the tach from a 6 cyc car?

[R1dd1ck913]

To day I ordered Condor solid motor and tranny mounts. I also ordered a power steering delete kit from them.

[R1dd1ck913]

Wow didn't realize I have not updated this in almost a year. Here is a few updates on the car. I have replaced the Headlights, Tail Light, Turn signals and wheels. Here is a few pics.

[R1dd1ck913]

I ordered some Camaro shocks and got some inserts from the home depot for the bushings. I hope to get them on tonight.

[R1dd1ck913]

Today I received my UUC BBK can't wait to get it on the car tomorrow.

[R1dd1ck913]

So I got the UUC BBK installed. Here is a before and after.

[R1dd1ck913]

Well got a few more parts in.

Before

After

Also did some body work and filled the holes.

[R1dd1ck913]

Got some new rotors, pads and calipers for the rear today.

[R1dd1ck913]

Today my Garagistic Sturt Bar showed up. Thing fits perfect. There was no need to jack up the car as it fit right over the studs.

[R1dd1ck913]

Car got some more love last night. I installed some new gears in the cluster and replaced a few bulbs while I was in there.

[R1dd1ck913]

Here is and update on my Catuned order.

[R1dd1ck913]

Few small repairs done today. New blower motor resistor. Blower only worked on high. Also replaced a clip on the passengers seat so it can slide forwards and backwards. I have a few more parts on the way for some other repairs. Will updated on them soon.