That's such a cool combo I've never seen it before! It would look awesome as you described a big lower, band the standard steels keep it clean and tasteful! Spot on
Announcement
Collapse
No announcement yet.
1968 Florida 1600 Restoration Project
Collapse
X
-
Here is a quick assessment of the rust. It's more substantial than I previously thought, but I already have a solution where the blue car will serve as panel donor for all rust repairs.
Enjoy the videos and music you love, upload original content, and share it all with friends, family, and the world on YouTube.
I found a guy who is a 30-year veteran bodyman and he will take on all rust repairs. I should have a excellent update in the next week. I'm going to move quickly with this car since I want to enjoy it for the rest of the summer and into the fall, and then we'll throw Winter and Spring in there too.
The blue car served as an excellent foundation of knowledge in basic restoration. This car will be similar in patina and I will do my best to make it clean and presentable. She will make an excellent surf car.
I need to take the m3 off surf duty and another 02 back in there.
M3 taking on surf duty:
And the goal for the 1600:
It will be done.world renown Harry Potter expert
sigpic
Comment
-
Seems like a lot of rust for a Cali car. Was it kept near the ocean?
I think I would just swap doors (if they weren't damaged) and trunk lid from the blue car and have them painted. I think you're gonna be looking at at least a partial paint job anyway, but maybe those areas can be spot-painted? I've never heard of that being done though. Might be hard to match new paint to the old patina'd paint. And I'm guessing based on experience that the rust you see there is maybe half of what there is...
Comment
-
Originally posted by ak- View PostYou had the walk-around video categorized as Comedy.
I like that.
Originally posted by rturbo 930 View PostSeems like a lot of rust for a Cali car. Was it kept near the ocean?
I think I would just swap doors (if they weren't damaged) and trunk lid from the blue car and have them painted. I think you're gonna be looking at at least a partial paint job anyway, but maybe those areas can be spot-painted? I've never heard of that being done though. Might be hard to match new paint to the old patina'd paint. And I'm guessing based on experience that the rust you see there is maybe half of what there is...
I could probably do the repairs myself, but it would be using means that I am familiar with (fiberglass/resin, or metal mesh patch/bondo filler). The best way would be to cut out the problem areas, grind down all rust, burn new metal on, treat with rust inhibitor, POR-15, then begin the bodywork/blending.
Fortunately, I have about 1/5 gallon of the touch up paint that this car came with. I should be able to match a new can or two with it. I will try my hand at blending the paint. If my attempts are a total failure, I'll go to plan B and expedite a full exterior restoration.
Both doors on the blue car are damaged so i wouldn't be able to use them.
I'll know more in the next week.world renown Harry Potter expert
sigpic
Comment
-
I started with this:
I then wire brushed all the loose rust and exposed more surface rust under the paint, used a product called Naval Jelly (kills rust and leave a rust-preventative coating) and scrubbed some more. This was the result. I intend to grind down all the rust, the POR-15 the spare tire well, followed by touch up paint. The good news is it's all surface rust. Very similar condition to the blue car.
And here is the paint the car came with. I am guessing part or the entire car was repainted at some point. From what I understand, this specific PPG paint is no longer sold in California due to a few chemicals it containers. This could be the basis of touch up paint for me after the rust repair. I'm guessing its a direct match.
And here is what the paint looks like. The stick I used was super clean. It's the same stick I use to submerge my clothes under water in the washing machine.
world renown Harry Potter expert
sigpic
Comment
-
I am glad to see you are still in the game. I look forward to seeing the future of this one. Subscribed.How to remove, install or convert to pop out windows
http://www.r3vlimited.com/board/showthread.php?t=297611
Could be better, could be worse.
Comment
Comment