73 Malaga Bavaria

[DIIRTY-30]

Wow, looks great. Can't wait to see how it turns out, Sub'd for sure.

[LateFan]

They're such a sweet car.

[phreshkid]

many of the chrome or stainless interior bits with pitting or corrosion will clean up mighty fine with 4/0 steel wool. It's amazing what steel wool can do to chrome.

[thestein1016]

many of the chrome or stainless interior bits with pitting or corrosion will clean up mighty fine with 4/0 steel wool. It's amazing what steel wool can do to chrome.

#word

[phreshkid]

Also, I probably have multiples of the plastic door handle inserts, should you choose to need any. They look to be the same handles used in 2002s.

-RD

[M-technik-3]

I was planning on coating the osb after I get everything mocked up. I considered going with a higher density wood, but if it's coated and wrapped it might be a waste. Regardless, at least I have a pattern, hahah

True, just thinking old seals have shrunk, granted you live in socal whereit never rains or when it does your drowning for days.

[thestein1016]

True, just thinking old seals have shrunk, granted you live in socal whereit never rains or when it does your drowning for days.

We'll see. The more I think about it, I might look into doing a nice stained wood trunk with veneer subwoofer enclosurea

[thestein1016]

Also, I probably have multiples of the plastic door handle inserts, should you choose to need any. They look to be the same handles used in 2002s.

-RD

Might hit you up. Will provide tacos

[animal]

Wow - you are lucky to have such a nice starting point!
Color is awesome too. Can't wait to see the updates, and wheel choice etc.
Love my BC's, have them on a few of my old BMW's now and may even replace my ground controls with them in the s52. Yes they ride that good.

[CubbyChowder]

I would love to own this car, very jealous!

[thestein1016]

I would love to own this car, very jealous!

Are you still doing roof racks?? Ive seen your work, and I like your style. Might make a great compliment to Katherine.


On a side note, 3 of the 4 linear actuators are in for power lock/central lock. However I have one sticky locking mechanism (not cylinder lock). Ive used plenty of silicon spray, however I might need something a bit stronger. Anybody have recommendations?? Also, needs to be a spray. I cant remove the lock mechanism without removing the glass frame.

[thestein1016]

Rebuilt one of the locks

[thestein1016]

Decided to reuse some subwoofers from a previous vehicle

[thestein1016]

Bluetooth enabled equalizer came in the mail.
This unit is nice and small (6x4) so I can hide it in the glove department

[thestein1016]

Made a key holder